Manual DePaepe HD 2000 URGENCE (page 22 of 30) (English, French)

646672

Zoom out

Zoom in

1/30

Settings programming

Note: HD2000 Urgence standard factory settings come

with:

- Programming access code = 0000

- Dialling = Tone

- Hook-Flash duration = 270 ms

- Pulse mark-break ratio = 66/33

- Access to memory programming =

unlocked

- Call barring = unlocked

To change settings, proceed as follows:

1) Make sure the telephone is connected to a powered

C.O. or PABX line.

2) Depress « PGR » key located on the small keypad

(Located at the back of the unit).

3) While keeping « PGR » key depressed, pick-up the

handset.

4) Release « PGR » key.

5) 2 sharp « beep » tones will confirm entering the

settings programming mode.

6) Enter the 4 digits programming access code with the

keypad (factory pre set code is: 0000)

This code can be modified (see « LIST OF

SETTINGS » section, pages 24-25).

7) If the right code is entered, 2 short « beep » tones

will be heard and the access to settings, changes will be

authorized.

If a wrong code is entered, a low « beep » tone will be

heard and the unit will return to talk mode.

8) Enter the 2 digits selected setting access code (see

« LIST OF SETTINGS » section pages 24-25)

9) 2 sharp « beep » tones confirming the selection will

be heard.

10) Enter your custom setting choice or the code or

number to store.

11) Terminate your setting by depressing « PGR » key.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DePaepe HD 2000 URGENCE in the language / languages: English, French as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DePaepe HD 2000 URGENCE Manual

Product: