751211
9
Zoom out
Zoom in
Previous page
1/72
Next page
Vintage Vinyl - Full size Turntable
VPL-210
USER MANUAL
Please read this manual carefully before use, and keep it for future
reference.
www.denver-electronics.com
DESCRIPTION
1. Adaptor holder with 45 RPM adaptor
2. Raise/lower lever
3. Speed selector (33/45/78)
4. Auto stop control
5. Tone arm rest
6. Tone arm
7. Cartridge
8. Turntable platter
9. Speaker
10. Power indicator
11. On/off switch and volume control
12. R channel
13. L channel
14. DC in
15. Previous track
16. Play/Pause/Delete
17. Next track
18. Mode: Recording/USB/SD/Bluetooth
19. USB port
20. SD/MMC card reader
2
INITIAL SETUP
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating voltage of the
unit. Your unit is ready to be connected to 5V DC adaptor.
AMPLIFIER CONNECTION (if required)
Whilst you can listen to your new turntable using the built in speakers you may wish to
connect it to your existing hi-fi system. Connect the audio connectors to the Line input on
your mixer or amplifier using an RCA cable (not supplied).
Red plug into R channel.
White plug into L channel.
Playing a record
Place a vinyl on the platter. For Single (45 RPM) record, use the 45 RPM adapter.
Choose the desired speed using the speed selection switch as 33, 45 or78 RPM.
Press the On/Off button to turn the turntable on.
Release the tone arm lock.
3
Carefully raise the tone arm.
Place the stylus vertically over the first track of the record; the turntable will
start turning automatically.
Lower the tone arm slowly on to the record.
When a record comes to the end, the turntable will stop automatically if the
auto-stop switch is in the ON position. If the switch is in the off position the
record will keep turning.
Lift up the tone arm and replace it on the tone arm rest.
Replace the protective cap on the stylus and close the tone arm lock.
Press the On/Off button to turn the turntable off.
Bluetooth function
Turn on the turntable and make sure the tone arm is on the rest.
The turntable will prompt to indicate entering Bluetooth function.
Enable the Bluetooth function on your smartphone and look for the “VPL-210”
Bluetooth device.
Once connected, you will hear a short voice prompt.
With the Previous Track, Pause/Play/Delete and Next Track buttons you can
control the choice of music on the turntable.
When you disconnect Bluetooth on your smartphone, you will hear a short
voice prompt.
Recording on USB stick / SD card
Connect a USB stick to the turntable’s USB port or insert an SD card into the
card reader.
Place a record on the turntable (see the Chapter “Playing a record”).
To start recording, press and hold the Mode button for about 2 seconds; a
beep tone indicates the start of the recording.
Place the tone arm on the record. The record is recorded in MP3 file format on
the inserted media (USB stick or SD card).
When the recording stops, press and hold the Mode button again for 2
seconds. Two beeps indicate the end of the recording. The recorded music will
be saved in the “RECORD0” folder on your USB stick or SD card.
Tracks are recorded in alphabetical order in the folder.
After recording, press the Mode button to play the recorded song.
To erase tracks from USB stick or SD card, press and hold the
Pause/Play/Delete button for 2 seconds while playing the track to be erased; a
beep tone indicates that the track has been erased.
Playback from USB stick or SD card
Connect a USB stick to the turntable’s USB port or insert an SD card into the
card reader; the media should only contain MP3 files.
The turntable prompts entering USB or SD function.
4
The music will start playing automatically.
With the Previous Track, Pause/Play/Delete and Next Track buttons you can
control the choice of music on the turntable.
Please notice - All products are subject to change without any notice. We take
reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment contains materials, components and substances that
can be hazardous to your health and the environment, if the waste material (discarded
electric and electronic equipment) is not handled correctly.
Electric and electronic equipment is marked with the crossed out trash can symbol, seen
above. This symbol signifies that electric and electronic equipment should not be disposed
of with other household waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment can
either be submitted free of charge at recycling stations and other collection sites, or be
collected from the households. Additional information is available at the technical
department of your city.
5
Hereby, Inter Sales A/S declares that the radio equipment type VPL-210 is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: www.denver-electronics.com and then click the search
ICON on topline of website. Write model number: VPL-210. Now enter product page, and
RED directive is found under downloads/other downloads.
Operating Frequency Range: 2402-2480MHz
Max Output Power: 1Wx2
Manufacturer`s name or trade
mark, commercial registration
number and address
Shenzhen BMT Electronics Co., Ltd.
91440300777173074R
2/F, 1 Building, QiYu Industrial Zone, Gongle,
TieZi Road, XixiangTown,
Baoan District, Shenzhen City, China.
Model identifier
U223C0A050100
Input voltage
AC 100-240V
Input AC frequency
50/60Hz
Output voltage
DC 5V
Output current
1A
Output power
5.3W
Average active efficiency
73%
Efficiency at low load (10%)
69%
No-load power consumption
0.05W
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
6
Vintage Vinyl Plattenspieler
VPL-210
BEDIENUNGSANLEITUNG
Bitte lesen Sie diese Bedienungsanleitung vor Gebrauch sorgfältig durch
und bewahren Sie sie für späteres Nachschlagen auf.
www.denver-electronics.com
7
BESCHREIBUNG
1. Adapterhalterung mit 45 U/min-Adapter
2. Tonarmhebel
3. Umschalter für Drehzahl (33/45/78)
4. Auto-Stopp-Schalter
5. Tonarmauflage
6. Tonarm
7. Tonabnehmer
8. Plattenteller
9. Lautsprecher
10. Betriebsanzeige
11. Ein/Aus-Schalter und Lautstärkeregler
12. Rechter Kanal
13. Linker Kanal
14. Netzteileingang
15. Vorheriger Titel
16. Wiedergabe/Pause/Löschen
17. chster Titel
18. Modus: Aufnahme/USB/SD/Bluetooth
19. USB-Port
20. SD/MMC-Kartenleser
8
ERSTEINRICHTUNG
STROMVERSORGUNG
Vergewissern Sie sich, dass die Netzspannung in Ihrem Haushalt mit der Betriebsspannung
des Geräts übereinstimmt. Ihr Gerät kann nun an einem 5 V/DC Netzteil angeschlossen
werden.
VERSTÄRKER ANSCHLIEßEN (sofern erforderlich)
Sie können den Ton über die integrierten Lautsprecher abspielen und je nach Bedarf ein
Hi-Fi-System anschließen. Schließen Sie die Audio-Anschlüsse über RCA-Kabel (nicht
mitgeliefert) am Line-Eingang Ihres Mischpults oder Verstärkers an.
Der rote Stecker wird am rechten Kanal angeschlossen.
Der weiße Stecker wird am linken Kanal angeschlossen.
Schallplatte abspielen
Legen Sie ein Schallplatte auf den Plattenteller. Für Singles mit 45 U/min
verwenden Sie den Adapter.
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver VPL-210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver VPL-210 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info