499100

Denver MTW-746TWIN Manual

4
Zoom out
Zoom in
Previous page
1/7
Next page
OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.
1. Slide POWER switch to turn on the player.
2. Open the disc tray by hand.
3. Place a disc onto the disc tray.
4. Close the disc tray by hand and the playback starts
automatically.
5. When a menu screen appears on the TV, move the navigation
buttons or press the numeric buttons to select a preferred
track number, then press ENTER/OK button to start playback.
GET STARTED
3
FUSE REPLACEMENT
NOTE: Don't throw out the positive(+) cap when replace the
fuse.
FUSE
POSITIVE(+) CAP
CONNECTING TO A CAR ADAPTOR
The car power adaptor is designed for use with vehicles that
have a 12V, negative ground electrical system.
WARNING:
Disconnect the car power adaptor when not in use. Not in use
in 24V vehicles.
CAUTIONS:
! Use the unit only with the recommended car power adaptor,
use with other car power adaptor might damage the unit.
!
!
!
!
!
The recommended car power adaptor is for use with this
unit only. Do not use it with other equipment.
In the interests of road traffic safety, do not operate the unit
or view video software while driving a vehicle.
Make sure the unit is fastened securely to prevent from
moving outside of the vehicle in an accident
When the inside of the cigarette lighter socket is dirty with
ashes or dust, the plug section may become hot due to
poor contact. Be sure to clean the cigarette lighter socket
before use.
After use, disconnect the car power adaptor from both the
unit and cigarette lighter socket.
To the cigarette lighter socket
ADJUST THE VOLUME
MUTE
SKIP AHEAD OR BACK
Press the VOLUME+/- button on the remote or press and hold
VOL+/- button on the unit to increase or reduce the volume.
While the power is on, the audio output of the main unit is to
be shut off by pressing the button. Press it again to resume
sound output.
Press PREV button during play to skip previous chapter (DVD)
or a track (CD), Press NEXT button during play to skip next
chapter (DVD) or a track (CD).
COLOR AND BRIGHTNESS ADJUSTMENT (FOR THE LCD
SCREEN)
REPEAT
Press TFT SET button on the remote repeatedly to adjust the
color intensity and brightness respectively via navigation
left/right button.
Press and hold this button for a moment to turn on or off the
TFT display.
During playback, press and hold F.FWD button or F.BWD
button on the unit or press these two buttons on the remote
respectively to scan the disc forward or backward at X2, X4,
X8, X20 normal speed.
Press PLAY button to resume normal play.
Press pause/step button during playback to pause. during
pause mode, each time the pause/step button is pressed, the
player will only play one frame; to resume normal play, press
play button.
Press STOP button during playback to stop playback; the
player activates its resume function when STOP is pressed in
STOP mode; press PLAY button again, playback resumes at
the point it stopped previously; open the disc tray or press the
STOP button one more time to clear the resume function.
Press SLOW button during playback, the disc will be played at
1/2 normal speed at first, each time this button is pressed, the
play speed becomes slower (down to 1/7 normal speed.)
Press PLAY button, normal play will resume.
Press REPEAT 1/ALL&A-B button during play, it will repeat
play one chapter/title or repeat all (for DVD disc), or repeat
play a track or all tracks (fo
1. Press SEARCH button during play and highlight the item to
be played (Title, Chapter, or Chapter time) by navigation
buttons.
2. Input the desired number or time via the numeric buttons.
3. Press OK button to confirm and the playback from the
located scene starts.
4. To exit search menu, press SEARCH button directly.
1. Press PROGRAM during playback to display the program
menu.
2. Select location(s) to be memorized via navigation buttons and
then enter desired Titles/Chapters numbers via numeric
buttons.
Example: Track 3, press "3"
Track 12, press "+10" and then "2"
Track 21, press "+10" twice and then "1"
3. To st
RAPID ADVANCE/REVERSE
PAUSE/STEP PLAY
STOP PLAYBACK
SLOW-MOTION PLAY (DVD)
SEARCH FOR PREFERRED SCENE
PROGRAM PLAY (UP TO 16 MEMORIES)
r CD), or repeat the sections
between two specific points (A-B).
art programmed playback, select PLAY on the menu;
pressing PROGRAM button again to exit programming.
CONNECTING TO AC ADAPTOR
Ensure all the cable are disconnected with unit before
connect to AC power source by AC Adaptor.
mother
Mother Unit
AC Adaptor
NOTE:
Before connect to
AC power, push the
POWER ON/OFF
switch to OFF.
To power outlet
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver MTW-746TWIN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver MTW-746TWIN in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver MTW-746TWIN

Denver MTW-746TWIN User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info