137077
4
Zoom out
Zoom in
Previous page
1/28
Next page
Please read this User Manual carefully to ensure proper use of this product and keep this manual for further reference.
,
Users Manual
DIGITAL VIDEO
DIGITAL AUDIO
MT-750
MT-750
THE EXCLAMATION POINT WITHIN AN
EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE
MANUAL ACCOMPANYING THE UNIT.
WARNING:
CAUTION:
CAUTION:
CAUTION:
WARNING:
FCC REGULATIONS STATE THAT ANY CHANGE
OR MODIFICATION TO THE EQUIPMENT, NOT
EXPRESSLY APPROVED BY MAKER OR ITS
AUTHORIZED PARTIES, COULD VOID USER'S
AUTHORITY TO OPERATE THIS EQUIPMENT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Safety Precautions
THE DVD VIDEO PLAYER IS A CLASS 1 LASER
PRODUCT. USE OF CONTROLS OR ADJUST-
MENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD
VIDEO PLAYER IS HARMFUL TO THE EYES, DO
NOT ATTEMPT TO DISASSEMBLE THE
CABINET.
REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
THE UNIT EMPLOYS A LASER SYSTEM. TO EN-
SURE THE PROPER USE OF THE UNIT, READ
THIS MANUAL CAREFULLY AND KEEP IT FOR
FUTURE REFERENCE.
IF THE UNIT REQUIRES SERVICING, CONTACT
THE SELLER OR SEE "TROUBLESHOOTING".
TO PREVENT DIRECT EXPOSURE TO THE
LASER RADIATION, DO NOT OPEN THE
CABINET. VISIBLE LASER MAY RADIATE
WHEN THE CABINET IS OPENED OR THE
INTERLOCKS ARE DEFEATED. DO NOT
STARE INTO THE LASER BEAMS.
THE LIGHTNING FLASH WITH ARRO-
WHEAD SYMBOL WITHIN AN EQUIL-
ATERAL TRIANGLE IS INTENDED TO
ALERT THE USER TO THE PRESEN-
CE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE UNIT'S CABI-
NET THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK
OF ELECTRIC SHOCK TO PERSONS.
TO PREVENT FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
NEVER ATTEMPT TO OPEN THE CABINET,
DANGEROUS HIGH VOLTAGES ARE PRESENTED
IN THE UNIT. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE- BLADE PLUG WITH WIDE SLOT AND
FULLY INSERT.
THE APPARATUS SHALL NOT BE EXPOSED
TO WATER AND NO OBJECTS FILLED WITH
LIQUID SUCH AS VASES SHALL BE PLAC-
ED ON THE APPARATUS.
1
Important Safety Instructions
Introduction
1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions
The safety and operating instructions should be
retained for future reference.
3. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
4. Follow Instructions
All operating instructions should be followed.
5. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
6. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. Water and Moisture
Do not use this product near water for example, near
a bathtub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8. Accessories
Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage
to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the product. Any mounting of the product
should follow the manufacturer's instructions, and
should use a mounting accessory recommended by
the manufacturer.
9. Portable Cart Warning
A product and cart combination should be moved with
care. Quick stop, excessive force, and uneven
surface may cause the product and cart combination
to overturn.
10. Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.
11. Power Sources
This product should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supply to your home,
consult your product dealer or local power company.
For products intended to operate from battery power
or other sources, refer to the operating instructions.
12. Grounding or Polarization
This product may be equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
13. Power Cord Protection
Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point
where they exit from the product.
(Symbol provided by RETAC)
2
Introduction
Important Safety Instructions
14. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to
the product, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of
the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antennadischarge
unit, connection to grounding electrodes, and
requirements for the grounding electrode. See figure
below.
19. Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
20. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A)When the power-supply cord or plug is damaged,
B)If liquid has been spilled, or objects have fallen
into the product,
C)If the product has been exposed to rain or water,
D)If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation,
E)If the product has been dropped or damaged in
any way.
F)When the product exhibits a distinct change in
performance this indicates a need for service.
21. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
22. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
23. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only
as recommended by the manufacturer.
24. Heat
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
15. Lightning
For added protection for this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and
power lines surges.
16. Power Lines
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
17. Overloading
Do not overload wall outlets, extension cords, or
integral convenience receptacles, as this can result in a
risk of fire or electric shock.
18. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the product.
3
MP3 Playback
Kodak Picture CD Playback
Trouble shooting guide
24
25
26
26
27
CARE OF DISCS
Technical Specification
Content
4
Safety Precautions
Important Safety lnstructions
1
2
3
4
Brief Instruction of Controls
Preparations
Accessories
System connection
Remote control operation
Modes and Features Setup
5
7
7
7
8
17
Important Safety lnstructions
Content
Language Setup
Video Setup
17
19
Audio Setup
Switch Setup
20
21
Rating Setup
23
Brief instruction of controls
Panel function:
1 2
3
4
5
6
7 8 9 10
11
12
13
14 15
16
17
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
VIDEO OUT JACK
PHONES JACK
AUDIO/OPTICAL OUT JACK
DC IN JACK
LCD SCREEN
DISC TRAY
SENSOR
SPEAKER LEFT
STANDBY ON/OFF
PREV
NEXT
PLAY/PAUSE
STOP
VOLUME -
VOLUME +
EJECT
SPEAKER RIGHT
5
VIDEO OUT
AUDIO
OPT OUT
DC IN 6~12V
VOLUMESTOP EJECT
PREV NEXT PLAY/PAUSEON/OFF
PORTABLE DVD/CD/MP3/MPEG4/CD-R/CD-RW/DVD-R/DVD-RW PLAYER
ON/OFF
AB
N/P
SUBTITLE
ANGLE
SETUP
MENU/PBC
STEP
L/R
TITLE
PREV NEXT
REPEAT
REV
PROG
DISPLAY
ZOOM
MUTE
ENTER
STOP
SLOW
FUNCTION
EJECT
1 2
3
4
5
6
7
8 9
10+
0
TIME
U/D SCAN
TFT ON/OFF
SPEAKER
RETURN
PLAY/PAUSE
VOL- VOL+
LANGUAGE
1
2
CR2025
HOW TO REPLACE THE BATTERY
STEP 1: PUSH THE BUTTON TOWARD LEFT;
STEP 2: PULL THE BATTERY LOADER OUT.
Remote Control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
STANDBY ON/OFF
PROGRAM
NTSC/PAL
SUBTITLE
LANGUAGE
ANGLE
SETUP
UP
LEFT
ENTER
L/R CHANNEL
DOWN
RETURN
ZOOM
PLAY/PAUSE
STOP
REV
FORWARD
MUTE
U/D SCAN
EJECT
DISPLAY
NUMBER KEY SELECT
TIME
MENU/PBC
TITLE
FUNCTION
RIGHT
SLOW
STEP
A-B REPEAT
REPEAT
VOLUME +
VOLUME -
NEXT
PREV
SPEAKER
TFT POWER ON/OFF
38
37
36
35
34
33
32
31
30
29
28
26
27
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Using the Remote Control
Point the remote control at the remote sensor in order for the player to function correctly. The
remote will function to approximately 21' from the remote sensor at an angle of approximately
30 each direction.
Note: Directing the remote sensor toward any light source, such as direct sunlight, may cause
the unit to malfunction. Do not spill water or put wet items on the remote control. Never
disassemble remote control.
BATTERIES
INCORRECT USE OF BATTERIES MAY CAUSE THEM TO LEAK, CORRODE OR EXPLODE.
Be sure to place the batteries in the correct direction.
It is dangerous to charge/heat/open or short-circuit the batteries.
Do not leave dead or expired batteries or mix old/new batteries.
When not using the remote control for a long duration of time, remove the batteries. When
operating range becomes reduced, replace all batteries with new, fresh ones.
If leakage from the battery occurs, wipe the battery liquid from the battery compartment, then
replace.
6
Brief instruction of controls
Introduction
Preparations
Accessories
1. Slim card remote controller with battery included 1pcs
2. 12 volt adapter(use in car) 1pcs 3. AC adapter 1pcs
4. Headrest mounting case 1pcs 5. Audio/video cable 1pcs
6. User manual 1pcs
(check that all accessories are included)
System connection
1. When making connection between this unit and other components, switch off all power source..
2. Scheme of connection
7
8
Note: 1. During CD playback, point A and B must be within the same track.
During DVD playback, point A and B can be selected from different chapters.
2. This function is subject to the disc.
A-B
During playback, press A-B to select point A.
Press it again to select point B. The player will repeat the section from A
to B automatically.
Press A-B third time to cancel A-B repeat and clear point A and B.
ON/OFF
EJECT
0-10+ keys
During playback, press ON/OFF to stop the
player and return to standby mode.
While the player is in standby, press ON/OFF
or any key on the front panel to resume normal
operation.
To open the disc tray, press EJECT.
These keys are used to input the time, as well as
title, chapter and track numbers.
When a numeric item is displayed on the screen,
press the 0-10+ keys to select the desired entry,
and press ENTER to confirm.
Remote Control Operation
9
Remote Control Operation
During playback, press DISPLAY to display the current time counter position.
Elapsed time of the current track/chapter
Press DISPLAY again to display additional information about the playing disc.
0:04:45
Other
Track
CD
1/15
Disc type
Elapsed time of the current track
Total tracks
Current track
0:04:45
DVD
Title 1/10
Audio
Subtitle
DVD
Disc type
Elapsed time of the current title
Current chapter
Current title
Audio type
Subtitle
Chapter 2/20 Angle 2/2
1 Eng
5.1Ch
1 Eng
Angle
0:04:45
DISPLAY
Others
0:00:10
0:00:10
0:00:10
Introduction
10
TIME
CD
Search
Time
Track
Notes:
.
Time searches for an exact time in
the movie.
In Title/Chapter mode, you cannot
SELECT a value outside the range of the
total number of titles or chapters
For some DVD discs, the Search
function is unavailable.
DVD
Search
Time
Title / Chapter
-:--:--
-:--:--
Use the number keys to input the desired Time, Title or Chapter, then press ENTER to confirm.
- - / - -
During playback, press TIME, and the [Track Search] menu will display as follows:
Press TIME again , the [Disc Search] menu will display as follows:
CD
Disc Search
Time
-:--:--
Others
Remote Control Operation
- -
Introduction
11
X2 X4 X8 X20X2 X4 X8
PREV
Press PREV to skip to previous chapter or track.
Press NEXT to skip to the next chapter or track.
During DVD or CD playback, press and hold to scan in reverse.
The player will review the disc at 2, 4, 8 and 20 times normal speed as follows:
Press PLAY to resume normal playback.
During DVD or CD playback, press and hold to scan forward.
The player will review the disc at 2, 4, 8 and 20 times normal speed
as follows:
Press PLAY to resume normal playback.
X20
Note: T f playback is
stopped about 5 minutes(when Screen Saver is set to on).
he screen saver will automatically turn on i
STOP
Press STOP once during playback to stop and hold playback.
Press PLAY to resume playback from the point you pressed STOP.
Press STOP twice to stop playback completely.
NEXT
Remote Control Operation
FWD
REV
Introduction
12
Remote Control Operation
Note: MP3 discs and some DVD discs do not have a 10 second review feature.
PLAY/PAUSE
Press PLAY/PAUSEfrom stop mode to start playback.
This function is not available if the elapsed time of current
track is less than 10 seconds.
Press PLAY/PAUSE during playback to pause playback.
Press PLAY/PAUSE to resume normal playback.
MENU/PBC
Note: This function is subject to the disc.
During DVD, playback , press MENU/PBC to return to the program
menu.
In the Setup Menu, press MENU/PBC to return to the main menu
or stop mode.
Any time, press MENU /PBC to cancel the current OSD or some
menus.
TITLE
Note: This function is subject to the disc.
During DVD playback, press TITLE to display the DVD title
menu or play the first title.
Introduction
13
Remote Control Operation
While [PROGRAM] is on, press ENTER to display the [Program] submenu:
CD
1 _ _
_ _
3 _ _
2
Program Input
4 _ _
5 _ _
6 _ _
7 _ _
8 _ _
9 _ _
10 _ _
11 _ _
12 _ _
DVD
1 _ _:_ _
2 _ _:_ _
3 _ _:_ _
Program Input Title / chapter
4 _ _:_ _
5 _ _:_ _
6 _ _:_ _
7 _ _:_ _
8 _ _:_ _
9 _ _:_ _
10 _ _:_ _
11 _ _:_ _
12 _ _:_ _
Play Program Clear All
Input the track numbers in the order you would like them to
play. When finished, select [Play Program] and then press
ENTER to play the tracks in the new programmed order.
Select [Clear All] and press ENTER to clear all the numbers
you have input.
Input the title number and the chapter number in the desired
order. Then select [Play Program] and press ENTER to play
the chapters in the order you have set.
Select [Clear All] and press ENTER to clear all the numbers
you have input.
Others
PROG
Play Program Clear All
N/P
Press N/P key to get NTSC,PAL,AUTO display the screen.
L/R
When a DVD is played, the active dubbing language will
be shown. When a SVCD or VCD is played the left track, right
track or stereo will be displayed accordingly.
When a bilingual story VCD is played, you may press the
button to select the language desired.
Introduction
14
Remote Control Operation
STEP
Press STEP during playback to pause playback.
Press STEP repeatedly to play frame.
Press play to resume normal playback.
Select to press REPEAT to select Repeat Title, Repeat chapter,
Repeat off during DVD playback.
Press REPEAT to select Repeat Single, Repeat All and Repeat
off ( CD or Others).
REPEAT
SLOW
Press slow repeatedly to slow motion playback at
variable speeds.
VOL+ VOL-
Press Volume <VOL+> button to increase Volume
Press <VOL-> button to reduce volume till to no volume output.
Introduction
15
Remote Control Operation
MUTE
Press MUTE to mute the Audio output
Press MUTE again to resume normal audio output
ZOOM
Q1 Q2 Q3
Q Off
During DVD playback, press ZOOM to magnify the image as
follows:
ANGLE
During DVD playback
Press ANGLE to view scenes from different camera
angles.
Press ANGLE repeatedly to change from one camera
angle to another.
Note: This function is disc specific.
LANGUAGE
Note: This function is disc specific.
During DVD playback
Press LANGUAGE repeatedly to select from up to 8 audio
languages/formats.
Introduction
16
Remote Control Operation
Note: This function is .
disc specific (languages will vary)
SUBTITLE
During DVD playback
Press SUBTITLE repeatedly to select from up to 32
subtitle languages.
TFT ON/OFF
FUNCTION
Press FUNCTION, you can adjust the brightness or
edges of the TFT LCD, use / to increase/reduce
the brightness or edges.
Press TFT ON/OFF key to TFT-LCD display
press it again to TFT-LCD turn off.
Press U/D SCAN key to scan reversed, press
it again to scanning is normal.
U/D SCAN
Introduction
17
Language Video Audio Switch Rating
English
German
Swedish
Denish
OSD Menu
Subtitle
Audio
DVD Menu
English
English
English
English
Language Video Audio Switch Rating
Modes and Features Setup
SETUP
In stop mode, press SETUP, and the TV screen will display the Setup
Menu as follows:
A. Press ENTER to display each submenu
B. Press SETUP to exit the Setup Menu
Language Setup
Select [Language] in the Setup Menu, and press ENTER to display [Language] submenu: the
Language Video Audio Switch Rating
OSD Menu
Subtitle
Audio
DVD Menu
English
English
English
English
Select press ENTER to display submenu[OSD Menu], and or the [OSD Menu] :
Press to change items
Press to
select the menu
item
Press to change your selection
A . Press ENTER to confirm.
B. Press SETUP to exit the Setup Menu.
A or . Press ENTER to set
B. Press to go back one menu
C. Press OR repeatedly to return to the Setup Menu
Setup Menu
MPEG4 subtitle
Western Europe
MPEG4 subtitle
Western Europe
18
Language Video Audio Switch Rating
Language Video Audio Switch Rating
English
English
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Language Setup
OSD Menu
Subtitle
Audio
DVD Menu
Subtitle
Audio
DVD Menu
English
English
English
English
English
English
English
Press to change your selection
Press to change your selection
Press to change your selection
Note: Subtitle languages vary by disc.
Note: Audio languages vary by disc.
Note: Menu languages vary by disc.
Modes and Features Setup
Select [Audio],and press ENTER or to display the [Audio] submenu:
Select [DVD Menu], and press ENTER or to display the [DVD Menu] submenu:
Select [Subtitle], and press ENTER or to display the [Subtitle] submenu:
OSD Menu
English
Language Video Audio Switch Rating
English
OSD Menu
Subtitle
Audio
DVD Menu
English
English
English
English
Introduction
German
Swedish
Denish
Auto
Off
German
Swedish
Denish
German
Swedish
Denish
MPEG4 subtitle
Western Europe
MPEG4 subtitle
Western Europe
MPEG4 subtitle
Western Europe
A. Press ENTER to change your selection
B. Press SETUP to exit the Setup Menu
Select [MPEG4 Subtitle], and press ENTER or to display the [MPEG4 Subtitle]
submenu:
Language Video Audio Switch Rating
OSD Menu
Subtitle
Audio
DVD Menu
English
English
English
English
Western Europe
Centra Europe
Off
MPEG4 subtitle
Western Europe
Language Video Audio Switch Rating
Language Video Audio Switch Rating
TV shape
TV system
View mode
4:3
16.9
[Video] the [Video] sub :Select in the Setup Menu,an d press ENTER to display menu
Video Setup
A . Pr ess ENTER to confirm B. Press SETUP to exit the Setup Menu
Press to change your selection
Press to
select the menu
item
Note: Not all DVDs offer movies in Full Screen format. If not, the disc will override your
TV Display setting and the movie will be displayed in Letterbox format.
A or set. Pr ess ENTER to
B. Press to return to the Setup Menu
TV shape
TV system
View mode
4:3
PAL
FILL
[4:3 ] -Pan and scan refers to pictures where part of pictures is cut
off so it fills the whole screen.
[4:3] -Letter Box refers to pictures where black bands appear at the
top and bottom.
[16:9] -The picture fills the screen of a wide-screen (16:9) television.
Modes and Features Setup
Select [TV shape], and press ENTER or to display the [TV shape] submenu:
[TV system] the [TV system] sub :Select and press ENTER or to display menu
Press to change your selection
A . Press ENTER to confirm
B. Press SETUP to exit the Setup Menu.
[NTSC] -Select if you are using NTSC signal system to match your TV set.
[PAL] -Select if you are using PAL signal system to match your TV set.
[AUTO]- Select if you are using AUTO signal system to match your TV set.
4:3
PAL
FILL
Language Video Audio Switch Rating
TV shape
TV system
View mode
4:3
FILL
PA L
NTSC
PA L
AUTO
19
Introduction
Language Video Audio Switch Rating
Digital Out
DRC
DOWN Sampling
AUDIO SETUP
Digital out:ln this setup item, you can choose the digital output (SPDIF output).
Set Digital Out to:
PCM To output 2 channel digital from the optical digigal audio outputs; e.g., to a Minidisc recorder.
RAW To output the raw 5.1 channel digital bitstream form the optical digital audio outputs; e.g., to an external amplifier.
Off To disable digital out.
20
Digital Output
Language Video Audio Switch Rating
DRC
DRC (Dynamic Range compress), you can turn ON/OFF this function if the Surroundings is changing.
DRC Setting
Digital Out
DOWN Sampling
OFF
Introduction
RAW
OFF
OFF
RAW
PCM
OFF
OFF
RAW
OFF
ON
Modes and Features Setup
[View mode] the [View mode] sub :Select and press ENTER or to display menu
Press to change your selection
A . Press ENTER to confirm
B. Press SETUP to exit the Setup Menu.
Language Video Audio Switch Rating
TV shape
TV system
View mode
4:3
PAL
FILL
FILL
Original
H FIT
W FIT
Fit to screen
Pan SCAN
21
SWITCH SETUP
This option is used to setup machine power management for protraction in playback time.
SPEAKER POWER
Select speak power ON and press ENTER speaker start into shutdown states, select speak power OFF and press ENTER,
speaker start up.
Language Video Audio Switch Rating
SPEAKER POWER
TFT SCAN MODE
ON
OFF
Introduction
Modes and Features Setup
ON
NORMAL
Language Video Audio Switch Rating
DOWN Sampling
ON
This option sets the audio output format.
In the linear PCM setting, ON means the digital audio output maximum sampling rate is 48KHz Therefore, when the titles
encoding sampling rate is 96KHz,the output will be forced converted to 48KHz.
lf OFF is selected,then the maximum output sampling rate is 96KHz and no conversion will take place.
DOWN Sampling
Digital Out
RAW
DRC
OFF
OFF
OFF
22
SWITCH SETUP
Language Video Audio Switch Rating
SPEAKER POWER
TFT SCAN MODE
NORMAL
TFT SCAN MODE
Select TFT SCAN mode REVERSE and press ENTER, scan is reversed.
Select TFT SCAN mode NORMAL and press ENTER again to normal scan.
Introduction
Modes and Features Setup
ON
NORMAL
REVERSE
Language Video Audio Switch Rating
Password ----
Rating
LOAD Factory
Registration
8. Adult
Reset
1:Kid Safe
2:G
3:PG
4:PG-13
5:PG-R
6:R
7:NC-17
8:Adult
Modes and Features Setup
Rating Setup
The Rating menu allows you to block playback
of DVDs based on their ratings.
Setting the Password & Rating Level
The DVD player allows you to block playback
of inappropriate content with a password-
protected Rating system (not all discs are rated).
A. From Stop mode, press SETUP.
B. Select Rating and press ENTER.
C. Select Rating and press ENTER repeatedly to set the rating from 1 (most restrictive)
to 8( least restrictive ).
If a password has already been set, the lock icon will be closed. You will not be
able to select Rating until you SELECT the correct password using the 0-9 keys.
D. Select Password.
E. Use the 0-9 keys to SELECT a 4-digit password and press ENTER. The lock icon will
close to indicate that the rating and password are set.
F. Press SETUP to save and exit.
Setting MPEG4 registration
Here, you will get a registration code, you can use the code to download some movies from MPEG4.
Not all DVDs are rated.
DVDs that are rated higher than the level you select will not play without SELECTING
the correct password.
If you forget your Rating password, select 8888 to clear the memory. Keep this pass-
word out of reach of children as if will always unlock the Parental Control setting.
Display
23
Introduction
MP3 Playback
File: A01
File window
Directory
File name
Current track
Total tracks
Elapsed time of
the current track
056/140
0:00:01
Press to select the file when the cursor appears in the file window.
Press ENTER to play the current file selected by the cursor.
Press to switch between the directory window and the file window.
Note: During MP3 playback, Forward Scan and Reverse Scan are not available.
MP3
Supported formats
Disc format: ISO 9660, Joliet
Music file format: MP3
MP3 bit rate (data rate): 32 -192 kbps
Total number of music files and albums: around 350 per disc.
Sampling rate: (CBR)32kHz/44. 1kHz/48kHz/64kHz; (VBR) 16kHz/22kHz/24kHz/32kHz (MPEG )
Note: The player will not identify or play MP3 discs under the following conditions: recording format is not supported,
badly scratched or deformed disc, MP3 recorded in CD-R or CD-RW which is not finalized, or a dirty pickup.
When a MP3 disc is loaded, the screen will display as follows:
CDA
1
2
3
4
5
6
A01
A02
A03
A04
A05
A06
A07
A08
A09
7
8
9
24
Kodak Picture CD Playback
Image Rotation
There are three modes to rotate a picture: original, 90 Deg, and 180 Deg. These operations are
allowed only when a picture is being displayed normally and will be cancelled automatically
when a new picture is displayed. The ANGLE keys are used to select the different rotation modes:
Press ANGLE OSD display original.
Press ANGLE again OSD display 90 Deg.
Press ANGLE again OSD display 180 Deg.
The introduction of KODAK Picture CD
A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by checking
the box on the photo finishing envelope when you drop off a roll of film (35 mm or Advanced Photo System (APS)
color print film) at the time of processing in Kodak Express store displaying "Kodak Picture CD" sign. When your
order is returned, you receive your prints, negatives, and your full roll of pictures safely stored on your KODAK
Picture CD. Each KODAK Picture CD brings you the tools to enhance, share and manage your pictures on your
computer. You also can record the JPEG picture into CD-R or CD-RW with the CD-Rewriter yourself.
Note: 1. The Max. Size of JPEG Picture can be supported: 3840X3840 pels
2. JPEG stands for Joint Picture Experts Group. It is the first International Standard on Still Picture
Compressing: ISO 10918-1, constituted by the Committee on Still Picture Compressing Standard of ISO.
The pictures on KODAK Picture CD are stored in this format (JPEG). This player can decode the JPEG
pictures in KODAK Picture CD and playback the pictures in different modes.
Now, you can playback Kodak Picture CDs on this player and view your wonderful pictures on your TV in the
comfort of your living room.
When a Kodak Picture CD is inserted on a player an automatic slide show is launched. Each picture in the Kodak
Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen.
General function:
You can set slideshow transition modes for any pictures.
Press PAUSE to stop playing.
Press PLAY to continue slideshow transitions.
Press or to see the previous or next picture.
Press STOP to return to root menu.
Zoom Function:
Note: During the ZOOM function, slideshow transitions and image rotation are disabled.
Q off: close zoom, press PLAY again to resume slideshow transition mode.
This player provides both Zoom in/out and Zoom pan function. Press the ZOOM
consecutively, the picture will zoom in/out in turn as followings:
Q4/3 Q3/2 Q2
Q1/4Q1/2Qoff
25
Trouble shooting guide
For your convenience, we have enlisted
some points to help solve problems you might
encounter while using DVD player.
No sound
Make sure the good connection between
player and other appliances such as power
amplifier or TV.
Make sure the right operation on TV and
power amplifier.
26
No picture
Ensure correct connection between player
and other appliances such as TV.
Make sure TV works on well.
Disc does not play
Make sure the disc is loaded correctly (label
side is facing up on the disc tray).
Make sure the disc is clean.
Remote controller does not work
Move the obstacle between player and remote
controller away.
Point the remote controller at ther emote
control sensor.
Check the battery.
Picture dividing
Make sure the disc is clean and without
scratches on it.
For the player is controlled by micro-
computer, if encountering problem, switch
on again inoff the power first, and switch
a few second, by then if no mistake notice
is displayed, the player could work well.
CARE OF DISCS
Protection
a. When loading or removing the discs, always
hold them by the center and edge.
b. Do not stick or write anything on the surface.
Protect discs against any fingerprint.
Cleaning
Wipe the discs from time to time using a soft
cloth. Always wipe from the center toward the edge.
Storage
a. Never bend the discs. During periods of no usage,
store them in their cases, which should be kept
vertically. Do not expose discs to high temperature,
dampness or extremely low temperature, or else it
may cause damage to the discs
b. Do not expose discs to direct sunlight.
27
Type
Model
Play mode
Disc mode
Video characteristic
Video S/N ratio
Resolution
Audio characteristic
Frequency response
Audio S/N ratio
Dynamic range
Distortion
D/A Converter
Output characteristic
Video output
S-Video output
Audio output
Power Voltage
Power consumption
Play time( batteries)
Size
Weight
PORTABLE DVD PLAYER
MT-750
NTSC/PAL/AUTO
DVD, CD, MP3, CD-R,CD-RW, HDCD, JPEG, DVD-R/W
90dB
500lires
fs 96KHz: 20Hz-20KHz:+/-1dB
90dB
90dB
< 0.01%
96KHz/24bit
1Vp-p(75 W)
Y: 1Vp-p(75 W) C: 0.3Vp-p(75 W)
OPTICAL
DC IN 6~12V
10W
2.5h
200x154x28mm
0.8Kg
.
.
.
Specifications are subject to change without notice.
Technical Specification
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver mt 750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver mt 750 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info