694766

Denver MT-1084NB Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
CONNECTING & PLAYING MEDIA
Loading and Playing a Disc
1. Slide the Open latch to open the Disc Door.
2. Load a disc into the DVD player, label side facing up. Close the Disc Door. After a disc is
loaded, it will begin playing automatically.
3. If the disc does not begin playing automatically, press the Play/Pause button.
Programming a Loaded Disc
1. While the loaded disc is playing, press the PROG button on the remote control.
2. Use the Arrow buttons to select a program slot.
3. Use the Number Keypad to enter in the chapter and title, or track.
4. Titles and chapters, or tracks will play in the order they are listed.
5. Repeat step 3 until the desired titles and chapters, or tracks are programmed.
6. Use the Arrow buttons to highlight the on-screen START button. Press the OK button to begin
playing the programmed disc.
Connecting a USB Thumb Drive
AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats are supported.
1. Connect a USB thumb drive to the USB Port.
2. Press the DVD/SD/USB button to enter DVD/SD/USB mode.
3. Use the Up/Down Arrow and Play buttons to select USB mode and play content from the
connected USB thumb drive.
Connecting a Memory Card
AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats are supported. Note: Formats are not universally
compatible. Playback may be dependent on recording conditions.
1. Connect a SD or MMC memory card to the Memory Card Port.
2. Press the DVD/SD/USB button to enter DVD/MCR/USB mode.
3. Use the Up/Down Arrow and Play buttons to select MCR mode and play content from the
connected memory card.
Accessing the Setup Menu
To access the Setup Menu, press the Setup button on the DVD player or the remote control.
Using the 3.5mm AV Output
Require a 3.5mm to 3x RCA audio/video cable (included).
1. Connect the 3.5mm to 3x RCA audio/video cable to the AV Output on the unit’s display.
2. Connect the 3.5mm to 3x RCA audio/video cable to the RCA stereo audio inputs and
composite video input on a television.
3. Audio and video played through the portable DVD player will now be seen and heard through the
connected television.
Using the 3.5mm AV Input
Require a 3.5mm to 3 x RCA audio/video cable (included).
1. Connect the 3.5mm to 3 x RCA audio/video cable to the 3.5mm AV Input on the portable DVD
player and the composite video outputs on an audio/video source such, as a television.
2. Press the DVD/AV In button to switch to AV In mode.
3. Audio and video played from the connected source （a television ） will now be output to the
portable DVD player.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver MT-1084NB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver MT-1084NB in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver MT-1084NB

Denver MT-1084NB User Manual - German - 6 pages

Denver MT-1084NB User Manual - Dutch - 6 pages

Denver MT-1084NB User Manual - French - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info