673998
8
Zoom out
Zoom in
Previous page
1/11
Next page
5. After completing of recording, unit will stop playback automatically.
6. Press “ stop “ button (3) to interrupt the recording mode anytime.
7. For encode whole CD track, pls stay CD in stop mode then press button (4) three times until the display flashing
REC USB, then system will start to playback CD and encoding whole disc.
Remark:-
- The recording speed is 1:1 and according to the actual plying time of the CD track
- The recording format is preset at MP3 bit rate : 128 kbps, sampling rate : 44.1khz
- Press “ stop “ button (3) to interrupt the recording mode at anytime.
B) Copying of MP3 file
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the “ button (4). The operation
procedures is same as CD encoding as stipulate on above, and the system will switch to copying mode only if MP3 file being read.
C) DAB encoding
1. Operate tuner mode refer above listening to radio section to receive the station you would like to encode.
2. Press the “ “ button twice (4) until the unit will display flashing with REC USB icon. Encoding is now performing.
3. After finish of recoding, press“ stop “ button (3) until the symbol “ REC USB “ disappear.
D) Cassette/Phono encoding
1) Plug in the USB pen drive or SD/MMC card for recording (make sure it had enough empty space).
2) Set the unit to your desired encoding mode by function button (10) such as tape mode or phonoetc and then start to
playback the track would like to encode, then press the “ “ button (4) twice.
3) The LCD display (2) will flashing with REC USB icon. Now the system is starting the encoding mode.
4) Start playback of cassette tape or your external Aux device which the track you prepare to encoding to MP3 format.
5) After finish of recoding, press“ stop button (3) until the symbol “ USB “ & “REC USB“ disappear.
E) track separation(On remote control only)
You can divide the recording music from tape or DABetc in to USB track by track during encoding. Every time when press the “
(track separation) button (on remote control) once during encoding from tape or Aux in, the system will generate a new track and
continuous the recording. The text “ SAVE at LCD display will flashing one time, it mean the unit is creating a new track successfully.
F) Copying of MP3 file
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the REC button (3). The operation
procedures is same as CD encoding as stipulate on above, and the system will switch to copying mode only if MP3 file being read.
File delete at USB / SD card (by remote control)
The system is able to erase the file stored inside the USB pen drive by following:-
1 Insert the media storage and set at “ USB “ mode.
2 Press the “ delete “ button and the LCD display (2) will show (del ---001)
3 Press skip forward or skip backward button to select the file going to delete
4 Press the “ delete “ button to enter “ yes / no “ mode and then press skip forward or skip backward to select “ yes “ or “
no “.
5 Press the “ delete “ button again to confirm the setting.
Remark :
- Press “ stop “ button once at remote handset to quite delete mode
Phono
noted:
- Remove the stylus protector.
- Be sure that the tone arm is being detached from the tone arm rest before operating and re-secured
again afterwards.
1. Select to Phono ” function (10).
2. set the speed selector (27) to the proper position depending on the record to be played.
3. Place the record on the platter (use the spindle adaptor (26) if required).
4. Lift the tone arm from the rest and slowly move it to the record side. The platter will start to rotate.
5. Place the tone arm to the desired position of the record.
6. Adjust the volume to the desired level (19).
7. At the end of record, the platter will automatically stop rotating. Lift the tone arm from the record and return it to
the rest.
8. To stop manually, lift the tone arm from the record and return it to the rest.
Remark : as some kind of record the auto-stop area was out of the unit setting, so it will stop before the last rack finish. In this case,
select the auto-stop switch to “ off “ position, then it will run to the end of the record but will not stop automatically (turn off the power
button or switch back the auto-stop switch (28) to “ on “ position to stop the platter rotate). Then put back the tone arm to the rest
position.
English 7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver MRD-165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver MRD-165 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver MRD-165

Denver MRD-165 User Manual - German - 13 pages

Denver MRD-165 User Manual - Dutch - 13 pages

Denver MRD-165 User Manual - French - 12 pages

Denver MRD-165 User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info