673998
4
Zoom out
Zoom in
Previous page
1/11
Next page
Location of controls
1) Turntable cover
2) LCD display
3) Stop /Enter button
4) Record button
5) Standby LED indicator
6) On/Standby button
7) Earphone jack
8) USB Socket
9) Cassette door (1)
10) Function button
11) SD card slot
12) Mem/Clock-Adjust button
13) Skip/tuning Down button
14) Cassette 1 control key
15) CD tray
16) Play/Pause /band button
17) Preset EQ button
18) Remote sensor
19) Volume knob
20) Tone control knob
21) Cassette door (2)
22) Folder/Preset Up button
23) Skip/Tuning Up button
24) Cassette 2 control key
25) CD tray open/close button
26) Spindle adaptor
27) Turntable speed selector
28) Auto switch
29) Pick-up holder
30) Antenna socket
31) Line out socket
32) Speaker socket
33) AC cord
34) Aux-in jack
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure. This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this unit off
while operating other radio devices.
Precautions for use
Installation
Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
AC connection
1. Plug in the AC cord (33) to the AC outlet. The unit will go to standby mode and the LCD display (2) will dim light up.
2. Turn on the unit (6), if the LCD display (2) is on with backlighting, it means the power supply is normal. Now your system is ready
to play the music.
Setting the clock
1. Set unit in standby mode.
2. Press and hold the “ Mem/Clk-Adj ” button (12) until display will flash “24HR” press the Skip Up or Skip Down button (23/13)
to select the clock format between 12 or 24Hour. Then press the “ Mem/Clk-Adj ” button (12).
3. The first digit of “ 0:00 ” is flashing on the LCD display (2). Press Skip Up or Skip Down button (23/13) to set the correct
hour. Press “ Mem/Clk-Adj ” button (12) to store the correct hour.
4. The third & fourth digit of “ 00 is flashing, press the Skip Up or Skip Down button (23/13) to set the correct minutes.
Then press “ Preset/Clk-Adj ” button (12) to store the correct minute.
English - 3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver MRD-165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver MRD-165 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver MRD-165

Denver MRD-165 User Manual - German - 13 pages

Denver MRD-165 User Manual - Dutch - 13 pages

Denver MRD-165 User Manual - French - 12 pages

Denver MRD-165 User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info