695743
6
Zoom out
Zoom in
Previous page
1/84
Next page
ENG-5
1. To store a preset, rst tune to your desired station, then press and hold the PRESET/MEMORY button on
the remote control, the display will show frequency and the “#” ash.
2. Press the PRESET ( UP or DOWN) button, until the display will show “ Preset Empty # ” and the “#” ash
to select your desired station preset number, then press the PRESET/MEMORY button on the remote
control to conrm your selection; the display will show “Preset # stored” in DAB/FM mode.
3. To recall a preset station, press the PRESET/MEMORY button once and then press the PRESET(UP or
DOWN) button to select the stations that you have stored, then press the PRESET/MEMORY button to
conrm your selection.
Note:
1. The stored stations will be saved into its memory and power off will not erase it. Storing a new station into
a preset location will erase the previously stored station in that location.
2. Turn on the unit and press and hold the MODE button until the display show” Press SELECT Key to
reset”, then press the SELECT/FM MONO/ST. button to erase all preset memory and the product in
standby mode.
LISTENING TO MUSIC OF A BLUETOOTH MOBILE PHONE OR
BLUETOOTH DEVICE
Pairing this system with a Bluetooth device
Pairing is an operation where Bluetooth devicesregister with each other beforehand. Use the
procedure below to pair the system with your Bluetooth device. Once a pairing operation is
performed, it does not need to be performed again.
Bluetooth pairing
1. Place the Bluetooth device to be connected to this system within
1 meter of the system.
2. Select the "Bluetooth”function.
3. Operate the Bluetooth device and perform the pairing operation.
For details about the operations of the Bluetooth device, refer
to the operation manual supplied with your Bluetooth device.
When searching for this system with the Bluetooth device, a list
of the devices found may appear in the Bluetooth device display
depending on the type of Bluetooth device. This system appears
as “DMS1702”. When establishing a connection with this system,
select the audio prole (A2DP, at the Bluetooth device. you may
require enter "8888" for the password (if your phone software
version is 2.1 or above is not require password) accept your
device's prompt until the display "BT LINK" is not ashing. The
connection is completed successfully.
BT LIN K
PASS 8888
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver MDA-240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver MDA-240 in the language / languages: All languages as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info