498854
30
Zoom out
Zoom in
Previous page
1/48
Next page
1.1.1.2 Transponder
You
can select the current Transponder or add the new Transponder.
1.1.1.3 Local Frequency
You
can change the local frequency.
Note:
You
must press OK to save this local frequency when the cursor is on the Local
Frequency item before you select another satellite.
1.1.1.4 22K
Tone
You
can change the 22k tone. Press LEFT/RIGHT select
ON, OFF
or
AUTO.
Note:
You
must press OK to save this 22K tone when the cursor is on the
22K Tone
item
before you select another satellite.
1.1.1.5 Polarity
You
can change the polarity. Press LEFT/RIGHT select
13V, 18V, 13/18V or OFF
.
Note:
You
must press OK to save this polarity when the cursor is on the
Polarity
item before
you select another satellite.
1.1.1.6 DiSEqC Switch
You
can change DiSEqC Switch. Press LEFT/RIGHT select
LNB1, LNB2, LNB3, LNB4 or
OFF.
Note:
You
must press OK to save this DiSEqC Switch when the cursor is on the
DiSEqC
Switch
item before you select another satellite.
1.1.1.8 Antenna mode
You
can change the Antenna mode. Press LEFT/RIGHT select
Fixed, Goto x or DiSEqC1.2.
When you select
Goto x::
Press OK to enter the submenu of the
Adjust Antenna
.
Press UP/DOWN to move the curser to the item of the
Transponder.
Press LEFT/RIGHT to select the current transponder.
Press UP/DOWN to move the curser to the item of the
Satellite Longitude.
Input the data of the Satellite Longitude and press LEFT/RIGHT select
East
or
West.
Press UP/DOWN to move the curser to the item of the
My Longitude.
Input the date of the My Longitude and press LEFT/RIGHT select
East
or
West.
Press UP/DOWN to move the curser to the item of the
My Latitude.
Input the date of the My Latitude and press LEFT/RIGHT select
South
or
North
.
Press UP/DOWN to move the curser to the item of the
Goto Position.
Press OK to move the Antenna to the position you want.
1.1.1.7 12V
You can change the Antenna mode. Press LEFT/RIGHT select Fixed, USALS or
DiSEqC1.2.
When you select USALS
27
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver LED-2256DVBTS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver LED-2256DVBTS in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver LED-2256DVBTS

Denver LED-2256DVBTS User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info