642742
7
Zoom out
Zoom in
Previous page
1/23
Next page
GB-6
Network Connection
Wired network
1. Check first of all whether the control lamps (LINK/ACT) of your LAN
connection or your router light up.
2. Connect the NETWORK socket on the unit to the corresponding port on
your Router using a commercially available LAN or Ethernet cable (CAT5 or
better with RJ45 connector).
3. Proceed with the operations described in the below “GETTING STARTED”.
It is not necessary to run through the setup wizard.
4. Using a wired network provides a better performance than a wireless
connection because the attached devices connect directly to the network
and are not subject to radio frequency interference.
Wireless network
1. Check first of all whether the control lamps (LINK/ACT) of your LAN
connection or your router light up.
2. Proceed with the operations described in the below “GETTING STARTED”.
It is highly recommended to run through the setup wizard in the System
Settings section.
This unit cannot be connected to a standalone modem directly. A
router or a modem incorporated with a router has to be used.
Since there are various connection congurations, please follow the
specications and instructions of your telecommunication carrier,
Internet service provider, and router setting guidebook.
GETTING STARTED
Powering ON/OFF
1. When you first connect the unit to the mains
socket, the unit will be in STANDBY mode
after showing “Welcome to Internet Radio
STARTING…. (F.1)(F.2)
2. Press the Standby
button on the unit or
remote control to switch the unit on.
3. Press the Standby
button on the unit or
remote control to switch the unit back to
standby on mode.
Welcome to
Internet Radio
STARTING
(F.1)
00/00/000
00 : 00
(F.2)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver IR-110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver IR-110 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver IR-110

Denver IR-110 Quick start guide - All languages - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info