Manual Denver IR-100 (page 16 of 19) (English)

572861

Zoom out

Zoom in

1/19

ENG-16

Selecting stations

To search for a station, press on the SELECT control once, the radio will start to scan up the frequency

band, and it will stop automatically once a station has been found. Alternatively, you can also press and

hold the or button to scan up or down the frequency band.

To tune manually, rotate the select control for your desired frequency.

Presets

To store a FM preset, press and hold the MEMORY button until the display

shows the "Save to Preset" screen. Select one of the 10 presets to store

the current station.

To select a preset, press the MEMORY button once, then select one of the

listed preset stations. When a preset station is playing, "Pn" (P1, P2 etc...)

will appear in the lower part of the display.

Display information

While the radio is playing, the frequency will be displayed, and if RDS information is available, station

name and any further RDS information such as programme name, track title and contact details can be

displayed. Stereo broadcasts are indicated with an icon at the top of the screen. To view further

information about the broadcast, press the INFO button.

Other Settings

Scan settings

FM scan is defaulted to stop at any available station, this would result the poor reception from weak

stations. To change the scan settings to stop only at stations with good signal strength, press the MENU

button then enter into the "Scan setting" section and select YES by the use of the SELECT control.

Audio settings

The radio will automatically switch between FM stereo and mono reception, but you can override this

and switch this function manually which is helpful for poor signal reception.

To select listening in mono, press the MENU button then enter into the "Audio setting" section and select

YES by the use of the SELECT control.

Note: During FM stereo reception, the received L/R stereo sound will be automatically combined to one

single channel to suit the single speaker design of this radio.

AUX in

AUX in mode plays audio from an external audio source such as MP3

player. To play audio with Aux in mode:

1. Decrease the volume level on both the radio and the audio source

device.

2. Connect the external audio source to the AUX IN (3.5mm) stereo

socket.

3. Either press MODE until the display shows "AUX in" or select "AUX

in" in the main menu by the use of the SELECT control,

4. Set the desired volume on the radio and the external audio device if

necessary.

Note: To further enhance energy saving, unit will go into standby mode

after about 15 minutes from Aux in mode if without signal input.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Denver IR-100 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver IR-100

Denver IR-100 User Manual - German - 20 pages

Denver IR-100 User Manual - Dutch - 20 pages

Denver IR-100 User Manual - French - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Denver IR-100 Manual

Product: