615546
12
Zoom out
Zoom in
Previous page
1/16
Next page
ENG-12
a) Press MENU to display the setting menu.
b) Press RIGHT twice to select System setting.
c) Press DOWN until to select Format.
d) Press OK and DOWN to select OK. OK will be highlighted
e) Press OK to start formatting the SD-card. During formatting, the display
screen will show a message “Please Wait” as below.
4.1.8 Set Photo Size
This parameter has three values: 8MP, 5MP and 3MP. The default one is 5 mega
pixels. The following shows how to set pixel size as 5M Pixel:
a) Press MENU to display the setting menu.
b) Press DOWN to select Resolution.
c) Press OK to select Pixel.
d) Press DOWN the select 5MP, press OK to save the current setting, then
press menu to return to info display.
4.1.9 Set Video Size
This parameter also has four values: 1080P, 720P, WVGA, QVGA.
The default value is 1080P,the following shows how to set 720P video size:
a) Press MENU and RIGHT to display video setting.
b) Press DOWN to select Resolution.
c) Press OK, then down to select 720P.
d) Press OK to save the current setting, then press menu to return to info
display.
4.1.10 Set Date and Time
You can change the date and time of the device when necessary, e.g., after every
battery change. The date format is year/month/day, the time format is hour:
minute: second. The valid value for year is between 2014 and 2050.
Provided that the date and time are needed to be set to November 15th, 2014 and
half past ten, the steps are as following:
a) Press MENU to display the setting menu.
b) Press RIGHT twice to enter into setup
c) Press DOWN till to select Date/Time.
d) Press OK to Display Date/Time Interface, Press UP and DOWN to change
the digit.Press LEFT and RIGHT to slide to nex item
e) Press OK to save all current setting, then press MENU to return to info
display.
4.1.11 Set Multi
This Item affects the number of pictures per each triggering in the camera or
camera+video mode. It has four options: “Single”, “3 Pictures” “6 Pictures” and “9
Pictures”. Its default setting is Single”. The following shows how to set photo multi
to 3 Pictures, provided that the previous option is 1 Photo:
a) Press MENU to display the setting menu.
b) Press DOWN until to select Multi.
c) Press OK and DOWN to select 3 pictures.
d) Press OK switch to save the current setting, then press MENU to return to
info display.
4.1.12 Set ISO
This menu could only help you get a better photo at night, there are 4 values:
AUTO,100,200,400. defult setting is AUTO
a) Press MENU to display the setting menu.
b) Press DOWN until to select ISO
Please Wait!
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver HSC-3004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver HSC-3004 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver HSC-3004

Denver HSC-3004 User Manual - German - 17 pages

Denver HSC-3004 Quick start guide - Dutch - 2 pages

Denver HSC-3004 Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info