4. PLAY/PAUSE button
5. VOLUME+ button
6. VOLUME- button
7. OPEN button
8. Earphones jack
9. STOP/POWER OFF button
10. SKIP/SEARCH FORWARD button
11. SKIP/SEARCH REVERSE button
12. MODE button
13. PROG button
14. CD door
15. BBS switch
How to Operate the Portable CD Player
Powering the Portable CD Player
The CD Player can be powered with either two AA (UM-3) batteries or an AC adaptor.
Note: both the batteries or AC adaptor are not supplied.
Using batteries (NOT SUPPLIED)
1. Open the battery compartment (3) on the back of the CD player by sliding open and gently
pulling upwards the battery door.
2. Check the polarity (+/-) inside the battery compartment.
3. Insert two AA (UM-3) batteries according to the polarity.
4. Close the battery compartment again.
For best performance and extended operating time, we recommend using alkaline batteries.
IMPORTANT!
• Please always ensure batteries are correctly installed. Incorrect polarity can damage the CD
Player.
• Never mix old and new batteries.
• Never mix alkaline, standard (carbon-zinc) and rechargeable (nickel-cadmium) batteries.
• If you are not planning to use the CD Player for an extended period of time, always remove the
batteries. Old or leaking batteries can cause damage to the CD Player and may void the warranty.
• Never dispose of batteries in a fire - batteries can leak or explode.
Using an AC adaptor (NOT SUPPLIED)
1. Insert the DC plug (at the end of the AC adaptor cord) into the DC input jack (2).
2. Plug the AC adaptor into a 220/230 V/AC, 50Hz AC power socket.
3. The CD Player will automatically disconnect from using battery power and operate using the
AC adaptor.
IMPORTANT!
• Only use an adaptor with an output voltage rated as DC 4.5V 800mA, and a centre negative plug.
