498866
8
Zoom out
Zoom in
Previous page
1/21
Next page
- 8 -
Basic Operation
All the functions can be conducted by pressing the keys on the remote control. For some functions you can also press
the buttons on the front panel of the TV set. Please check the table on Page 6 for details.
Power On/Off
1.Turn on the POWER button on the back cover, the TV is at STANDBY status, press <POWER> on the remote
control or < > on the control panel to turn on the TV. The power indicator is red at STANDBY status, it is green when
the TV is ON and has signal.
2.Press <POWER> on the remote control to switch between ON and STANDBY.
3.You can turn off the TV directly by pressing POWER button on the TV set.
To receive TV program
1.Press <MENU> to display the OSD main menu.
2.Press < / > to select “SET UP”, press <ENTER>; Press < / > to select
“Auto tuning”, press <ENTER>.
3.Press < / > to select a
corresponding Sound Mode, press
<ENTER> to start auto tuning. A brand
of tuning progress will be display on the
bottom side of the screen.
4.During searching, you can press the
<EXIT> to stop searching at any moment, and
return to the previous menu.
Tips: Before perform Auto tuning, you must select a country where you are by
selecting Country option in the FUNCTION menu.
The TV set begins to store the TV program from channel 0 automatically. After auto
tune, you can watch the TV programs one by one by pressing <CH->/<CH+>, or press
<-/--> and numeric keys to select the channel you want to watch.
To adjust volume
Press <VOL->/<VOL+> to decrease or increase the volume.
Mut
e
Press <MUTE>, the mute mark appears on the bottom left corner of the screen, it indicates the MUTE function is on,
the sound disappears; press <MUTE> again, the mark disappears, it indicates the MUTE function is off, the sound
recovers.
Return
Press < > to return to the last program.
Receiving the TV program by using number key
When you select the program number which is less than 10, press “-/--“ until the screen appears “ -“, then press the
numeric keys.
When you select the program number which is more than 10 (including 10), press “-/--“ until the screen appears “ --“,
then press the numeric keys.
When you select the program number which is more than 100 (including 100), press “-/--“ until the screen appears
“ ---“, then press the numeric keys (Max 199).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver DFT-3215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver DFT-3215 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver DFT-3215

Denver DFT-3215 User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info