499237
27
Zoom out
Zoom in
Previous page
1/33
Next page
8 MULTIPLE HANDSET AND BASE OPERATION (OPTIONAL
PURCHASE)
In order to be able to make and receive telephone calls, a new handset has to be
subscribed to the base unit. You can subscribe 5 handsets to one base unit. By
default, each handset is subscribed as handset 1 on the base unit upon delivery
(base unit 1). !!! You only need to subscribe the handset if: !!!
the handset subscription has been removed from the base unit (e.g. for
reinitialisation)
you want to subscribe a different handset to this base unit.
8.1 Subscribing a handset to a base unit
Keep the Paging key on the base unit pressed for 20 seconds until the
Line/Charge Indicator
on the base unit begins to blink rapidly. The
Line/Charge indicator
will blink rapidly for one minute. During this
minute, the base unit is in subscribing mode and you must do the following to
subscribe the handset:
1 Press the Programming key
.
2 Press the Up or Down key
repeatedly until 'BASE SUB' appears on the
display.
3 Press the Programming key
. 'BASE _' appears on the display.
4 Enter a number of the base unit you would like to subscribe the handset to
(1-4).
Note: Each handset can be subscribed to 4 different DECT base units. Each
base unit is assigned a number from 1 to 4 in the handset. When you
subscribe a new handset, you can assign a base unit number. It is best to
use '1' .
5 'SEARCHING' and the symbol
appears on the display.
6 The RFPI code (each base unit has a unique RFPI code) appears on the display
and a signal sounds when the handset has found the base unit.
7 Press the Programming key
. 'PIN' appears on the display.
8 Enter the 4-digit PIN code of the base unit in (default PIN code is '0000').
9 Press the Programming key . The handset is subscribed to the base unit.
27 Model:DDP-300
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver DDP-300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver DDP-300 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info