695734
5
Zoom out
Zoom in
Previous page
1/84
Next page
POWER SUPPLY
The unit can be powered by either AC power or batteries.
OPERATING THE UNIT ON AC POWER
Insert one end of the supplied power cord to the DC jack at the rear of the unit, and the
other end into the wall outlet.
When connecting the power cord, make sure that the power cord is firmly pushed into the
DC jack and the wall outlet for power supply.
OPERATING THE UNIT ON BATTERIES
1. To operate the unit on batteries, the AC power cord must be disconnected from the unit.
2. Unplug the AC power cord from the unit and insert 3 AA batteries (not included) in the
battery compartment.
3. Close the battery compartment door.
Note: Check your batteries regularly. Old or depleted batteries should be replaced. If the
unit is not to be used for some time, or is being run exclusively on AC power, remove the
batteries from the battery compartment to avoid battery leakage.
Warning: Before using the unit. Check that the local mains supply is compatible with the
unit. Do not plug or unplug the power cord when your hands are wet.
If you do not use the unit for a long period of time (i.e. Vacation etc.), disconnect the plug
from the wall outlet.
BATTERY SAFETY PRECAUTIONS:
Keep the batteries away from children and pets.
Insert the batteries observing the proper polarity (+/-). Failure to properly align the battery
polarity can cause personal injury and/or property damage.
Remove old or depleted batteries from the product. Remove the batteries when the
product is not used for extended periods of time to prevent damage due to rust or
corrosion of batteries.
Never throw batteries into a fire. Do not expose batteries to fire or other heat sources
Battery Disposal: Old or depleted batteries must be properly disposed of and recycled in
compliance with all applicable laws. For detailed information, contact your local solid
waste authority.
Follow the battery manufacturer’s safety, usage, and disposal instructions.
ENG-5
1.5V AA
Batteries
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver CR-425 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver CR-425 in the language / languages: All languages as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info