54/106
Regular checks
Concerning the tightening of the bolts: lever, crank, pedals, brackets.
The tightening torques to apply are as follows:
The other tightening torques depend on the nut sizes: M4: 2.5 to 4.0 Nm., M5: 4.0 to 6.0 Nm., M6: 6.0 to
7.5 Nm. Tighten the bolts according to the required torque.
Regularly check the tyres and the tread of the rear wheel: wear, cuts, cracks, pinching. Replace the tyre if
necessary. Check the wheel rims for excessive wear, warping, denting, cracks…
Revisions
For safety reasons and to maintain the components in a good state, you should have your bicycle revised
periodically by your distributor. Your bicycle should also undergo regular maintenance by a qualified
technician.
First revision: 1 month or 150 km
• Check the components are well-tightened: crank arm, wheel, stem, pedals, handlebars, seat
clamp,
• Check the power-assistance system is working correctly,
• Check and adjust the brakes,
• Tighten and/or straighten the wheels.