Turning the VOL knob Right or Left (3), you can adjust VOL/BASS/TREB/BAL/FAD. To select other
functions, press the SEL (2) button shortly until the desired functions is shown on the display. Figure
1 shows how control functions are selected using the SEL button.
Fig. 1 Selection of sound control functions
1. VOL 2. SEL 3. BAS 4. TRE 5. BAL 6. FAD
Turning the VOL knob Right or Left. Increase or decrease the volume by turning
VOLVOL
or
VOLVOL
. These
buttons can be used to adjust the BASS, TREBLE, BALANCE and FADER.
TA SEEK/TA ALARM (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these func-
tion.
TA SEEK Mode or TA ALARM mode is selected by
VOLVOL
or
VOLVOL
.
- TA SEEK mode:
When newly turned station does not receive TP information for 5 sec., the radio retunes to next station
which has not the same station (PI) as the last station, but has the TP information.
In TA seek mode, the current station can be changed to the completely different station because the
unit searches TP station when the eld strength of the current station is very weak, or the current
station has no TP signal.
- TA ALARM mode:
Any automatic retune mode is not activated, just can hear Beep sound.
MASK DPI (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
MASK DPI: masked only the AF which has different PI.
MASK ALL: masked the AF which has different PI and NO RDS signal with eld strength.
RETUNE L / S CONTROLS (2)
When press the SEL button for more than 2 seconds, it is activated as selecting Retune mode.
RETUNE L: Select 90 seconds as the initial time of automatic TA search.
RETUNE S: Select 30 seconds as initial time.
AUDIO DSP CONTROLS (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
LOUDNESS CONTROLS (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
ESP
ESP 10 / ESP 40
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL
MASK DPI
SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL
RETUNE
SEL
RETUNEDSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
RETUNEDSP
SEL
TA SEEK
SEL
2 sec.
SEL
DSP ONMASK DPI
SEL
RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
LOUD
LOUDON/OFF
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
SEL
MULTI
SELSEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL/DX
LOCAL
SEL
STEREO
SEL
BEEP
VOL
STEREO/MONO
STEREO
SEL
BEEP
VOL
BEEP ON/OFF
SELSEL
BEEP
VOL
SCROLL
SCROLL
SEL
SCROLL
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL
SEL
PAIRING
SELSEL
STEREO
SEL
BEEP
SEL
SCROLL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
MULT ON/OFF
SEL
MULT
VOL
VOL
VOL
VOL
VOL
VOL
VOL
SEL
SCROLLSCROLL 1/2
VOL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
E6
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
ESP
ESP 10 / ESP 40
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL
MASK DPI
SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL
RETUNE
SEL
RETUNEDSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
RETUNEDSP
SEL
TA SEEK
SEL
2 sec.
SEL
DSP ONMASK DPI
SEL
RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
LOUD
LOUDON/OFF
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
SEL
MULTI
SELSEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL/DX
LOCAL
SEL
STEREO
SEL
BEEP
VOL
STEREO/MONO
STEREO
SEL
BEEP
VOL
BEEP ON/OFF
SELSEL
BEEP
VOL
SCROLL
SCROLL
SEL
SCROLL
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL
SEL
PAIRING
SELSEL
STEREO
SEL
BEEP
SEL
SCROLL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
MULT ON/OFF
SEL
MULT
VOL
VOL
VOL
VOL
VOL
VOL
VOL
SEL
SCROLLSCROLL 1/2
VOL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
ESP
ESP 10 / ESP 40
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL
MASK DPI
SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL
RETUNE
SEL
RETUNEDSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
RETUNEDSP
SEL
TA SEEK
SEL
2 sec.
SEL
DSP ONMASK DPI
SEL
RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
LOUD
LOUDON/OFF
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
SEL
MULTI
SELSEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL/DX
LOCAL
SEL
STEREO
SEL
BEEP
VOL
STEREO/MONO
STEREO
SEL
BEEP
VOL
BEEP ON/OFF
SELSEL
BEEP
VOL
SCROLL
SCROLL
SEL
SCROLL
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL
SEL
PAIRING
SELSEL
STEREO
SEL
BEEP
SEL
SCROLL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
MULT ON/OFF
SEL
MULT
VOL
VOL
VOL
VOL
VOL
VOL
VOL
SEL
SCROLLSCROLL 1/2
VOL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
ESP
ESP 10 / ESP 40
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL
MASK DPI
SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL
RETUNE
SEL
RETUNEDSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
RETUNEDSP
SEL
TA SEEK
SEL
2 sec.
SEL
DSP ONMASK DPI
SEL
RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
LOUD
LOUDON/OFF
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
SEL
MULTI
SELSEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL/DX
LOCAL
SEL
STEREO
SEL
BEEP
VOL
STEREO/MONO
STEREO
SEL
BEEP
VOL
BEEP ON/OFF
SELSEL
BEEP
VOL
SCROLL
SCROLL
SEL
SCROLL
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL
SEL
PAIRING
SELSEL
STEREO
SEL
BEEP
SEL
SCROLL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
MULT ON/OFF
SEL
MULT
VOL
VOL
VOL
VOL
VOL
VOL
VOL
SEL
SCROLLSCROLL 1/2
VOL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
ESP
ESP 10 / ESP 40
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL
MASK DPI
SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL
RETUNE
SEL
RETUNEDSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
RETUNEDSP
SEL
TA SEEK
SEL
2 sec.
SEL
DSP ONMASK DPI
SEL
RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
LOUD
LOUDON/OFF
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
SEL
MULTI
SELSEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL/DX
LOCAL
SEL
STEREO
SEL
BEEP
VOL
STEREO/MONO
STEREO
SEL
BEEP
VOL
BEEP ON/OFF
SELSEL
BEEP
VOL
SCROLL
SCROLL
SEL
SCROLL
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL
SEL
PAIRING
SELSEL
STEREO
SEL
BEEP
SEL
SCROLL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
MULT ON/OFF
SEL
MULT
VOL
VOL
VOL
VOL
VOL
VOL
VOL
SEL
SCROLLSCROLL 1/2
VOL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
LOUD ON/OFF mode is selected by
VOLVOL
or
VOLVOL
. The bass and treble response will be boosted.
ESP MODE (2)
When press the SEL button for more than 2 seconds, it is activated as 10 sec. or 40 sec. of ESP mode
can be selected.
Note: 10 sec./40 sec. for CD, 120 sec. for MP3 automatically works.
MULTI CD SECTION MODE (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
CD MULTI ON/OFF mode is selected by
VOLVOL
or
VOLVOL
. CD MULTI ON: Read multi section CD.
CD MULTI OFF: Read rst section only.
SCROLL MODE
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
SCROLL 1: Unit displays song details but no text scrolling.
SCROLL 2: Unit displays song details and scrolls the text information to the left.
BEEP MODE (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
BEEP ON: BEEP sound can be heard from speaker when the buttons are pressed.
STEREO/MONO (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
When FM stations are weak and are disturbed, listening can be improved by selecting MONO.
LOCAL/DX (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
“Local” position in areas with strong signals to let radio stop at only strong stations during manual
tuning (LOC appears). Select Distant position in areas with weak signals to listen to all stations.
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
ESP
ESP 10 / ESP 40
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL
MASK DPI
SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL
RETUNE
SEL
RETUNEDSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
RETUNEDSP
SEL
TA SEEK
SEL
2 sec.
SEL
DSP ONMASK DPI
SEL
RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
LOUD
LOUDON/OFF
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
SEL
MULTI
SELSEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL/DX
LOCAL
SEL
STEREO
SEL
BEEP
VOL
STEREO/MONO
STEREO
SEL
BEEP
VOL
BEEP ON/OFF
SELSEL
BEEP
VOL
SCROLL
SCROLL
SEL
SCROLL
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL
SEL
PAIRING
SELSEL
STEREO
SEL
BEEP
SEL
SCROLL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
MULT ON/OFF
SEL
MULT
VOL
VOL
VOL
VOL
VOL
VOL
VOL
SEL
SCROLLSCROLL 1/2
VOL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
ESP
ESP 10 / ESP 40
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL
MASK DPI
SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL
RETUNE
SEL
RETUNEDSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
RETUNEDSP
SEL
TA SEEK
SEL
2 sec.
SEL
DSP ONMASK DPI
SEL
RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
LOUD
LOUDON/OFF
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
SEL
MULTI
SELSEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL/DX
LOCAL
SEL
STEREO
SEL
BEEP
VOL
STEREO/MONO
STEREO
SEL
BEEP
VOL
BEEP ON/OFF
SELSEL
BEEP
VOL
SCROLL
SCROLL
SEL
SCROLL
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL
SEL
PAIRING
SELSEL
STEREO
SEL
BEEP
SEL
SCROLL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
MULT ON/OFF
SEL
MULT
VOL
VOL
VOL
VOL
VOL
VOL
VOL
SEL
SCROLLSCROLL 1/2
VOL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
ESP
ESP 10 / ESP 40
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL
MASK DPI
SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL
RETUNE
SEL
RETUNEDSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
RETUNEDSP
SEL
TA SEEK
SEL
2 sec.
SEL
DSP ONMASK DPI
SEL
RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
LOUD
LOUDON/OFF
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
SEL
MULTI
SELSEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL/DX
LOCAL
SEL
STEREO
SEL
BEEP
VOL
STEREO/MONO
STEREO
SEL
BEEP
VOL
BEEP ON/OFF
SELSEL
BEEP
VOL
SCROLL
SCROLL
SEL
SCROLL
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL
SEL
PAIRING
SELSEL
STEREO
SEL
BEEP
SEL
SCROLL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
MULT ON/OFF
SEL
MULT
VOL
VOL
VOL
VOL
VOL
VOL
VOL
SEL
SCROLLSCROLL 1/2
VOL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
E7
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
ESP
ESP 10 / ESP 40
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL
MASK DPI
SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL
RETUNE
SEL
RETUNEDSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL
SEL
MASK DPI
SEL
RETUNEDSP
SEL
TA SEEK
SEL
2 sec.
SEL
DSP ONMASK DPI
SEL
RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
LOUD
LOUDON/OFF
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
SEL
MULTI
SELSEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL/DX
LOCAL
SEL
STEREO
SEL
BEEP
VOL
STEREO/MONO
STEREO
SEL
BEEP
VOL
BEEP ON/OFF
SELSEL
BEEP
VOL
SCROLL
SCROLL
SEL
SCROLL
SEL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SELSEL
RETUNEDSP
SEL
ESP
MULT
LOCAL
SEL
PAIRING
SELSEL
STEREO
SEL
BEEP
SEL
SCROLL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
MULT ON/OFF
SEL
MULT
VOL
VOL
VOL
VOL
VOL
VOL
VOL
SEL
SCROLLSCROLL 1/2
VOL
TA SEEK
SEL
2 sec.
SEL
LOUD
SEL
MASK DPI
SEL
SEL
RETUNEDSP
SEL
ESP
SEL
MULT
PAIRING MODE (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these func-
tion. (Please refer to HOW TO PERFORM PAIRING on page 11)
4. PRESET STATIONS (1,2,3,4,5,6)
(A) RADIO MODE:
When pressed momentarily, these keys select a preset station directly. When pressed longer than 1
sec., current station is stored in preset memory bank. When PTY mode is selected, the PTY switch
is shared as follows:
PTY music group ---- PTY speech group ---- OFF
MUSIC SPEECH
1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO
2. EASY M, LIGHT M 2. SPORT, EDUCATE, DRAMA
3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED
4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN
5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN
6. FOLK M 6. TRAVEL, LEISURE, DOCUMENT
(B) CD/MP3 PLAYER MODE:
1. PAUSE 2. INT 3. RPT 4. RDM
USING THE RDS FUNCTION
What is RDS?
The RDS (Radio Data System) is a digital information system developed by the EBU (European Broad-
cast Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of information services and
automatic retuning functions for RDS-compatible car stereos.
In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden.
Test transmissions are being conducted in many other European countries. It is expected that RDS will
be available in most western European countries in the near future.
5. ‘AF/REG’ function (ALTERNATIVE FREQUENCIES)
When pressed momentarily, AF/REG switching mode is selected.
When AF/REG switching mode is selected, the radio checks the signal strength of the AF all the time.
When pressed long, it is activated as regional mode ON/OFF.
– Regional mode ON:
AF switching or PI SEEK is implemented to the station which have all PI codes same as current station.
REG segment is turned on in LCD display.
– Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented.
6. ‘TA’ function (TRAFFIC ANNOUNCEMENT)
When pressed momentarily, it is activated as TA mode on or off
When TA mode is on and trafc announcement is transmitted
– When the unit is in CD/MP3 mode, it will switch to radio mode temporarily.
– If the volume level was under the threshold point, it will be raised to the threshold point.
– When TP station is received, TP segment is turned on in LCD display.
7. ‘PTY’ function (PROGRAM TYPE)
PTY MUSIC ---- PTY SPEECH ---- PTY OFF
While selecting PTY type, its selection is implemented by preset buttons as described in preset key.
When PTY is selected, the radio starts to search corresponding PTY information, and stops if the
corresponding PTY information is detected.
8. STEREO/MONO (ST)
When FM station is weak and disturbed, listening can be improve by selecting MONO.
9. DISPLAY (DISP)
When this key is pressed, it is operated as the conversion of each display mode as follow.
E8
1) In case of receiving RDS station.
RADIO MODE
PS ---- CT ---- FREQ ---- PTY
CD/MP3 PLAYER MODE
CDP ---- CT ---- PS ---- FREQ ---- PTY
2) In case of receiving NON RDS station
RADIO MODE
FREQ ---- CLOCK ----NO PTY
CD/MP3 PLAYER MODE
CDP ---- FREQ ---- CLOCK ---- NO PTY
Each display time is several seconds, and come back to 1’st position after several seconds.
Notes: • CT = clock time • FREQ = frequency • CDP = CD Player
10. MODE BUTTON (MD)
By pressing this key, user can select. AUX/TUNER/CD-MP3/USB or MMC/SD mode.
11. BAND BUTTON (BD)
Each band is toggled cyclically by pressing this key FM1---FM2---FM3.
12. AUTOMATIC OR MANUAL TUNING (FREQ UPOR FREQ DOWN)
(A) RADIO MODE
When pressed momentarily, these keys are operated as MANUAL tuning mode.
When pressed longer than 1 sec., they are operated as SEEK tuning mode.
(B) CD/MP3 PLAYER MODE
When pressed momentarily, they are operated as TRACK UP or TRACK DOWN mode.
When pressed longer than 1 sec., they are operated as CUE or REVIEW mode.
13. AUTO SEEK SEARCH TUNING (A/PS)
By pressing shortly, the radio searches for each preset station.
When eld strength level is bigger than the threshold level of stop level, the radio is holding at that
preset number for 5 sec. with releasing mute, and then searches again.
By pressing longer than 1 sec, and then 6 strongest stations are preset to the corresponding preset
number. When AS operation is nished, the radio executes the preset scan.
14. ‘SCAN’ AUTOMATIC TUNING CONTROL (SCN)
This key is operated as RADIO SCAN. The operation is similar as normal search but different thing
is holding 5 seconds on every station detected in RADIO SCAN mode.
15. MUTE BUTTON (MU)
Press and hold this button to mute the sound at once. Press again to return to previous volume level.
16. LCD DISPLAY
The Liquid Crystal Display will display the current state of the unit.
17. OPEN THE FRONT PANEL
Press button and the front panel will open.
CD CONTROL LOCATION OF PARTS
18. CD SLOT
Carefully insert the CD into the disc slot with the label side uppermost. The CD starts automatically
play.
19. CD EJECT BUTTON
Press the EJECT button to remove the CD.
20. TOP BUTTON
Press to play rst song of disc.
21. PAUSE BUTTON
During “PLAY”, press (21)button to “PAUSE”. Press it again to resume play.
E9
TRACK/SEARCH BUTTON (12)
FORWARD AND REVERSE TRACK SEARCH (or changing songs)
Press the SKIP button (or) during play to go to the desired track(song).
....REVERSE ....FORWARD
Press and hold the SKIP button (or) during play to scan the disc at high speed. When the desired
music section of the disc is found, release the button. Normal play will resume.
22. INTRO BUTTON (Preview all Tracks)
When this button is pressed, “INT ON” indication is displayed and the rst several seconds of each
track of the disc is played. Press again to stop intro and listen to track.
23. REPEAT BUTTON
When this button is pressed, “RPT ON” indication is displayed and play of the selected track will be
continually repeated until the Track repeat mode is cancelled by pressing ‘RPT’ button again.
24. RANDOM BUTTON
When this button is pressed, “RDM ON” indication is displayed and each track of the disc is played in
random instead of normal progression. To cancel RANDOM mode, press ‘RDM’ button (24) again.
25, 26. 10 TRACK UP/DOWN SELECT: (In case of MP3 les)
M5: 10 Track down / M6: 10 Track up
HOW TO SELECT MP3 FILES
1. Searching Track:
• Press and hold “A/PS”, then search track is activated.
• Press “SEL” button, then the rst digit will ash.
• Rotary “VOL knob to right or left”, select rst digit desired.
• Press “SEL” button, then the rst digit is xed and second digit will ash.
• Rotary “VOL knob to right or left”, select 2’nd 3’rd respectively.
• Then automatically the song selected will start.
2. Searching Character:
• Press and hold “A/PS”. Press “A/PS” again, then character search mode is activated.
• Press “SEL” button, then “A” character is displayed.
• Rotary “VOL knob to right or left”, you can select the desired letter.
• Press “SEL” button longer than 2 sec.
• The song with the same character you selected is displayed.
• Rotary “VOL knob to right or left”, you can select the desired song.
• Press “SEL” button, then the song selected will start.
3. Searching File Name:
• Press and hold “A/PS”. Press “A/PS” again, then directory search is activated.
• Press “SEL” button, then the rst directory is displayed.
• Rotary “VOL knob to right or left”, you can select the desired directory.
• Press “SEL” button again, then the directory is xed and the rst le name is displayed.
• Rotary “VOL knob to right or left”, you can select the le you want.
• Press “SEL” button, then the song selected will start.
Connecting it to Portable MP3 Player
27. USB Port
Using USB cable to connect Your Portable MP3 Player.
28. MULTI-MEDIA CARD (MMC) / SD CARD SLOT
Support MP3 ID3 format music only.
* IMPORTANT INFORMATION:
BECAUSE OF THE GREAT VARIETY OF PRODUCTS WITH USB,SD AND MMC CARD PORTS
AND THEIR SOMETIMES QUITE MANUFACTURER-SPECIFIC FUNCTIONS WE CAN NEITHER
GUARANTEE THAT ALL DEVICES WILL BE RECOGNIZED NOR THAT ALL OPERATING OPTIONS
THAT ARE POSSIBLE IN THEORY WILL ACTUALLY WORK
E10
HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
HOW TO PERFORM PAIRING
Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a procedure used to connect
2 Bluetooth devices together.
1. Press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “PAIRING” displays.
3. Press and hold SEL button to engage paring mode. “PAIRING” blinks on the display.
4. Turn on the Bluetooth feature of your mobile phone. Perform “Add Bluetooth device” from your mobile phone. The
mobile will search for any Bluetooth devices within the range. Select “CAR BLUETOOTH” and enter Passkey: “0000”
to connect to the car audio. (Please refer to the instruction manual of your mobile phone for Bluetooth Pairing).
5. The LCD will display “PAIRED” after successful pairing.
Note:
• IfIf “DISCONN” shows instead of “PAIRING”, it means the head unit currently is paired with another device. Press
and hold SEL button to disconnect the connection and perform steps above again.
• “CAR BLUETOOTH” is the Bluetooth device name of the car stereo.
• Refer to your cellular user manual for the proper procedures of pairing Bluetooth devices.Refer to your cellular user manual for the proper procedures of pairing Bluetooth devices.
USING REMOTE CONTROL
LOCATION OF REMOTE CONTROL
1. POWER ON / OFF
2. ANSWER A CALL
3. VOLUME +
4. END A CALL
5. BAND
6. SELECT MENU FUNCTION
7. VOLUME -
8. MODE
9. PHONE NUMBER /BUTTON 1-6: STATION PRESETS
10. STEREO / MONO
11. SCAN STATIONS / PHONE MODE
12. ALTERNATE FREQUENCIES (AF)
13. TRAFFIC ANNOUNCEMENT (TA)
14. PROGRAM TYPE (PTY)
Switching to Telephone Mode
1. During any operation mode, press and hold “
*
” to activate TELEPHONE mode.
Press and hold it again to return to previous mode.
Making Calls Using the Remote Control
You can make calls directly from the remote control. Before you make calls, make sure that the devices are properly
paired and connected.
1. Press and hold “
*
” on remote control. Unit switch to phone mode.
2. Enter the phone number via the remote control keypad and pressbutton to dial out.
Pressbutton to make corrections when entering numbers.
3. Pressbutton to end call.
Scan Radio Station
SCAN function scans the entire channel’s frequencies and plays it for 5 seconds if a channel is found.
1. In Tuner mode, press “
*
” to start SCAN function. Press it again to end.
2. When a channel is found, you can press and hold a memory preset key (1-6) to save it.
Audio Streaming
If your phone is “A2DP” format compatible, then you can play music in your mobile and the sound will be transferred
to car head unit.
1. Make sure your mobile and the unit is properly paired and connected.
2. Play the music through your mobile music player software.
3. Press MODE repeatedly until “BT-PLAY” appears in the display. The sound will be transferred to the head unit.
Answering / Hanging Up
To answer a call, press thebutton on the remote control.
Once you have finished your conversation, press thebutton to hang up.
Calls (Outgoing, Incoming)
The unit stores all the incoming and outgoing calls. Use this feature to check the numbers and make calls from it.
“OUT NUM” – outgoing calls made through the remote control.
1. Press and hold (*) then press and hold SEL button for 2 seconds. “OUT NUM” displays.
2. Press and hold SEL button again.
3. Rotate volume knob to search for entries and pressto call.
“IN NUM” – incoming calls received.
1. Press and hold (*) then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “IN NUM” displays.
3. Press and hold SEL button again.
4. Rotate volume knob to search for entries and press to call.
Adding Contacts
The unit can save contact telephone number for quick access.
1. Press and hold (*) then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “ADD NUM” displays.
1
3
4
2
7
6
9
5
8
10
11
121314
RESET
3. Press and hold SEL button again.
4. Using volume knob, enter the name of the contact. Press SEL button to save each character entered.
5. Enter the phone number. Press SEL button to save each number entered.
6. Press and hold SEL button to save entry.
Finding Contacts
After adding contacts, you can use this feature to find them.
1. Press and hold (*) then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “FIND NUM” displays.
3. Press and hold SEL button again.
4. Using volume knob, select the name of the contact and pressto call.
Deleting Contacts
1. Press and hold (*) then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “FIND NUM” displays.
3. Press and hold SEL button again.
4. Rotate VOL knob until the name of the contact you want to delete displays.
5. Press and hold “” for 2 seconds to delete contact.
How to Set Incoming Call Melody
1. Press and hold (*) then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “MELODY” displays.
3. Rotate VOL knob to the desired melody.
How to Set Incoming Call Ring Volume
1. Press and hold (*) then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “RING” displays.
3. Rotate VOL knob to the desired level.
How to Set Conversation Volume
1. Press and hold (*) then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “TEL” displays.
3. Rotate VOL knob to the desired level.
Disconnect Paired Devices
You can disconnect to an already paired Bluetooth device from your car stereo.
1. Press and hold (*) then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “DISCONN” displays.
3. Press and hold SEL button again to disconnect.
• RESET
Reset button is placed on the housing.
The reset button is to be activated for the following reason:
• Initial installation of the unit when all wiring is completed.
• All the function button do not operate.
• Error symbol on the display.
Instructions on environment protection
Do not dispose of this product in the usual household garbage at the end of its lifecycle; hand it over at a collection
point for the recycling of electrical and electronic appliances. The symbol on the product, the instructions for use or
the packing will inform about the methods for disposal.
The materials are recyclable as mentioned in this marking. By recycling, material recycling or other forms of re-
utilization of old appliances, you are making an important contribution to protect our environment.
Please inquire at the community administration for the authorized disposal location.
ALL RIGHTS RESERVED
COPY RIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
Note: Specication and the design are subject to possible modication without notice due to improvements.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Denver CAD-471 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Denver CAD-471 in the language / languages: English as an attachment in your email.
The manual is 1,52 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.