Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a procedure used to connect
2 Bluetooth devices together.
1. Press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “PAIRING” displays.
3. Press and hold SEL button to engage paring mode. “PAIRING” blinks on the display.
4. Turn on the Bluetooth feature of your mobile phone. Perform “Add Bluetooth device” from your mobile phone. The
mobile will search for any Bluetooth devices within the range. Select “CAR BLUETOOTH” and enter Passkey: “0000”
to connect to the car audio. (Please refer to the instruction manual of your mobile phone for Bluetooth Pairing).
5. The LCD will display “PAIRED” after successful pairing.
Note:
• IfIf “DISCONN” shows instead of “PAIRING”, it means the head unit currently is paired with another device. Press
and hold SEL button to disconnect the connection and perform steps above again.
• “CAR BLUETOOTH” is the Bluetooth device name of the car stereo.
• Refer to your cellular user manual for the proper procedures of pairing Bluetooth devices.Refer to your cellular user manual for the proper procedures of pairing Bluetooth devices.
USING REMOTE CONTROL
LOCATION OF REMOTE CONTROL
1. POWER ON / OFF
2. ANSWER A CALL
3. VOLUME +
4. END A CALL
5. BAND
6. SELECT MENU FUNCTION
7. VOLUME -
8. MODE
9. PHONE NUMBER /BUTTON 1-6: STATION PRESETS
10. STEREO / MONO
11. SCAN STATIONS / PHONE MODE
12. ALTERNATE FREQUENCIES (AF)
13. TRAFFIC ANNOUNCEMENT (TA)
14. PROGRAM TYPE (PTY)
Switching to Telephone Mode
1. During any operation mode, press and hold “
*
” to activate TELEPHONE mode.
Press and hold it again to return to previous mode.
Making Calls Using the Remote Control
You can make calls directly from the remote control. Before you make calls, make sure that the devices are properly
paired and connected.
1. Press and hold “
*
” on remote control. Unit switch to phone mode.
2. Enter the phone number via the remote control keypad and pressbutton to dial out.
Pressbutton to make corrections when entering numbers.
3. Pressbutton to end call.
Scan Radio Station
SCAN function scans the entire channel’s frequencies and plays it for 5 seconds if a channel is found.
1. In Tuner mode, press “
*
” to start SCAN function. Press it again to end.
2. When a channel is found, you can press and hold a memory preset key (1-6) to save it.
Audio Streaming
If your phone is “A2DP” format compatible, then you can play music in your mobile and the sound will be transferred
to car head unit.
1. Make sure your mobile and the unit is properly paired and connected.
2. Play the music through your mobile music player software.
3. Press MODE repeatedly until “BT-PLAY” appears in the display. The sound will be transferred to the head unit.
Answering / Hanging Up
To answer a call, press thebutton on the remote control.
Once you have finished your conversation, press thebutton to hang up.
Calls (Outgoing, Incoming)
The unit stores all the incoming and outgoing calls. Use this feature to check the numbers and make calls from it.
“OUT NUM” – outgoing calls made through the remote control.
1. Press and hold (*) then press and hold SEL button for 2 seconds. “OUT NUM” displays.
2. Press and hold SEL button again.
3. Rotate volume knob to search for entries and pressto call.
“IN NUM” – incoming calls received.
1. Press and hold (*) then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “IN NUM” displays.
3. Press and hold SEL button again.
4. Rotate volume knob to search for entries and press to call.
Adding Contacts
The unit can save contact telephone number for quick access.
1. Press and hold (*) then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “ADD NUM” displays.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Denver CAD-452 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Denver CAD-452 in the language / languages: English as an attachment in your email.
The manual is 1,51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
