797294

Denver BTN206 Manual

6
Zoom out
Zoom in
Previous page
1/52
Next page
The headset is compliant with the Bluetooth Specification 4.1support the following
profiles: Headset Profile (HSP) V1.6, Hands-free Profile (HFP) V1.5, Advanced Audio
Distribution Profile (A2DP) V1.0, and Audio Video Remote Control Profile (AVRCP)
V1.4 input rating 5V DC, 0.5A
Calls:
To make a call, use your mobile phone in the normal way when the headset is
connected to it. Quickly Press the MFB twice to call the last number in the call list.
When a phone call comes in, quickly press the MFB to answer it, or long press about
1.5 seconds to reject the call. Call is ended when short press MFB during a call.
Listen to Music:
To listen to music, connect the headset to phone or compatible Bluetooth devices that
support A2DP Bluetooth profile. The available music functions depend on your
Bluetooth devices. If you receive or make a call while listening to music, the music is
paused until the call ends.
To play a song, select in the music player and press the Play/Pause key on the
headset.
To pause or resume playing a song, press the Play/Pause key.
To select the next song during playback, press the volume up key quickly.
To select the previous song, press the volume down key quickly.
To increase the volume, press and hold the volume up key, there will be beep town
when reaching max volume.
To decrease the volume, press and hold the volume down key. (Until Mute)
Disconnect the Headset:
To disconnect the headset from your device, switch off the headset, or disconnect it in
Bluetooth menu of your device.
Reconnect the headset:
To connect the headset to the phone or Bluetooth devices that you have last used with
it, switch on the headset, or make the connection in the Bluetooth menu of your
device.
Passive Mode:
You can use Denver BTN-206 as a wired headphone to save batteries. Simply connect
one end of the 3.5-3.5 audio cable to the bottom of the left ear cup to your MP3 player.
Inserting an audio cable disable the wireless functionality.
Low Battery Warning:
At power on condition, when battery voltage is lower than 3.0V, there will be a warning
beep every 60 seconds.
Power-Off at Low Battery Condition:
At power on condition, when battery voltage is lower than 2.9V, the headset will switch
off automatically.
Congratulations on your purchase and thank you for your use of our Bluetooth Active
Noise Cancelling Headset. In order to start quickly, please read the user guide
carefully.
Caution
1. Please turn off the headset and put it into box to avoid damage, scratches or
bracket deformation when long time no use. In order to prolong the battery service life,
please charge every 6 months.
2. Please charge at first if the headset is left unused for long time.
3. The battery of headset is original and please don’t change it by yourself.
4. Please keep the headset under dry place.
5. Please don’t put this product into the environment with temperature over than 60℃
or into fire to avoid battery blast accident.
6. Please don’t bent or twist the bracket to avoid deformation.
7. Please don’t tear down ear-cushions by un-professional person.
8. Don’t adjust the volume to a very high level and continued play. If tinnitus occurs,
please turn the volume down or stop playing, do not turn the volume up suddenly.
Please slowly turn up the volume to avoid hearing damage caused by high volume.
9. Do not use the headset in dangerous place or place where cannot hear the outside
sound.
Included:
The headset contains the following parts:
Bluetooth Active Noise Cancelling Headset X 1
Manual X 1
3.5mm – 3.5mm audio Cable X 1
Micro USB Charging Cable X 1
Charge the Battery:
The headset contains a Micro USB cable that can be connected to your computer or
4
other device made for USB charging. Plug the Micro USB end of the included USB
cable into the USB micro port charger connector under the left ear-cap of the
headphone. Plug the other end into a USB port on your computer or other devices
made for USB charging. The indicator light will be red while charging. Once fully
charged, the indicator light will turn off. Charge time is about 3 hours on an empty
battery.
Active Noise Cancelling On:
Hold the ANC button for 1 second. Green LED light will turn on. The ANC function is
available at both Wired and Wireless condition.
Active Noise Cancelling Off:
Hold the ANC button for 1 second. Green LED light will turn off. The ANC function
must be switched off by manual operation.
Bluetooth Switch On:
To switch on, press and hold the MFB about 3 seconds. The headset enters Bluetooth
searching mode. Blue light on.
Bluetooth Switch Off:
To switch off, press and hold the MFB about 3 seconds.
Pairing:
1. Ensure that your phone or Bluetooth device is switched on.
2. To pair the headset if it has not been previously paired with a device, switch on the
headset. The headset enters the pairing mode, and the blue indicator light starts to
flash quickly. To pair the headset if it has been previously paired with another device,
ensure that the previously paired devise is switched off.
3. Activate the Bluetooth feature on your phone or Bluetooth devices, and set it to
search for Bluetooth devices.
4. Select “Denver BTN-206” from the list of found devices on your phone or Bluetooth
devices.
5. When successfully connected, the blue light turns to continuously lighting.
The headset that has been previously paired with another device will automatically
connect with the device if the device is power on and within connecting range, if not,
the headset will enter standby mode with continuously blue light.
Adjust the volume:
Turn the volume up or down by a long press on the volume +/- key during a call or
while listening to music. When the volume reaches to Maximum volume, there is a
warning tone.
Application:
Denver BTN-206 can make and receive calls hands-free with your compatible mobile
phone and listen to music from a compatible Bluetooth device, but they should be with
10 meters (33 feet) of each other.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver BTN206 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver BTN206 in the language / languages: All languages as an attachment in your email.

The manual is 0.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info