Manual Denson DS400-HDM (page 19 of 100) (English, Dutch, French)

583090

Zoom out

Zoom in

1/100

5. Main menu

5-1-3 Search All (Blue key in TP Setup)/TP Search

By pressing BLUE button in the TP Setup, this

mode will search all channel of the satellite without

regarding the frequency. By pressing Right( ) button

and adjusting the frequency or leave as it is, you can

search the specific channel regarding the frequency

you choose.

5-1-4 Antenna Positioning

Select DiSEqC Motor in Motor Setting box.

Select appropriate Satellite, Frequency, and Step

size (1,2,3,4STEP / Continuous)

Select Move Dish menu and press , buttons to move

West or East.

Antenna will move to the direction you press

(West, East) as per the Step Size you select in Step

Size menu. Select appropriate option in Command

Mode(Save, Reset, Go To Sat Position, Go To Position

0, Set East Limit, Set West Limit, Disable Limits, Enable

Limits, Recalculate).

DiSEqC

Select Antenna Positioning using , button and press OK. Antenna Positioning box will

Show up on the screen.

USALS

Select USALS in Motor Setting box.

Move to Satellite and press OK to select Satellite.

Select Go To Position 0 in Command Mode for

“Position 0” which is the imaginary point on the

geostationary orbit of the satellite and press OK.

Select Go To Sat Position in Command Mode for

“Sat Position” which is calculated from the

“Position 0” and press OK.

Use the Step Size and Move Dish commands to

move the antenna if you want to manually control

the antenna position.

Press RED button to change the satellite position

(My Longitude and My Latitude).

*Unicable setting

-You can use “Unicable” using by , key in Motor

Setting box. In this case, you can set frequency

using by , key in SCR ID box and can set

frequency using by numeric key, in detail.

Hello, i m interesting about this Denson. is it possible to have the same manual but in ...French. i come from Belgium. thank you very much. Submitted on 20-4-2017 at 10:20
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Denson DS400-HDM in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 7,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Denson DS400-HDM Manual

Product: