668293

Denon X1800 Prime DJ Manual

10
Zoom out
Zoom in
Previous page
1/68
Next page
10
Operation
Effects
BPM Effect Module
The built-in effect module enables you to apply any one of several effects to specific channels
based on its current tempo.
To turn the BPM effect module on or off, press FX On/Off.
To select the channel to which the BPM effect module will apply its effects, turn the FX
Channel Assign knob. The options are: Channel 1, 2, 3, or 4; X-Fader A or B (either side of
the crossfader); Mic (both microphone signals); or Master (the master mix).
To apply or remove the effect to or from the cue channel, press FX Cue. When the button
is lit, effects will be applied to the headphones’ cue channel only.
To select an effect, turn the FX Select/Enter knob.
These are the available effects:
• Echo: This effect adds echoes of the original signal.
• Delay: This effect adds repeated instances of the original signal that decay over time.
• Ping Pong: This is a stereo delay effect where the rate of delay is different between the
left and right channels.
• Trans (transition): This effect cuts off the original signal at a regular rate.
• Flanger: This effect adds a slightly delayed copy of the original signal to create a comb-
filter effect (often referred to as resembling a jet plane engine).
• Filter: This effect varies the filter cutoff frequency at a regular rate.
• Phaser: This effect adds a copy of the original signal with its phase shifted slightly to
create a subtle, modulatory effect.
• Reverb: This effect adds reverberation to the original signal. The amount of delay
depends on the tempo.
• Roll: This effect samples the current audio signal and repeats it at a regular rate based on
the current time division.
• RevRoll (reverse roll): This effect samples the current audio signal and repeats it
backward at a regular rate based on the current time division.
• BeatBreak: This effect samples the 4 beats of each bar of the original signal and replays
them (within the same bar) according to a preset pattern, creating a “stuttering,”
“breakbeat” effect.
To select a pattern to use, turn the FX Time knob to select Pattern 0–15, as shown in
the second display. The 16 blocks ( █ ) and/or lines ( __ ) below it indicate the rhythm of
the current pattern similarly to a drum machine’s step sequencer: a block represents a
“hit”/”strike” and a line represents a rest.
Examples:
indicates a hit on each beat.
indicates a hit on every 8th note.
indicates a hit on every 16th note (every
note of the pattern).
Use the Utility menu to edit the patterns (see Utility Menu > Advanced Audio).
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon X1800 Prime DJ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon X1800 Prime DJ in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info