16
Operation
RT (Radio Text)
1
Press the MENU button to select menu.
3
Press the TUNING/PRESET knob or ENTER
button to set the RDS search selection mode.
2
Either turn the TUNING/PRESET knob or
press the
CHANNEL/CONTROL button to
display “RDS”.
4
Either turn the TUNING/PRESET knob or
press the
CHANNEL/CONTROL button to
display “RT ON/OFF”.
5
Press the TUNING/PRESET knob or ENTER
button to set the RT ON/OFF selection mode.
6
Either turn the TUNING/PRESET knob, press
the
CHANNEL/CONTROL button to choose the
“RT ON” or “RT OFF”.
7
Press the TUNING/PRESET knob or ENTER
button to set whether to enable or stop the
RADIO TEXT function.
If no text data is being broadcast, “NO TEXT DATA” is
displayed.
Switching RDS information display
1
Use the procedure described at “Auto tuning”,
“Manual tuning” or “Recalling preset stations”
to tune in a frequency with an RDS station.
2
Press the DISPLAY button to switch the RDS
reception information.
The display switches as shown below each time the
DISPLAY button is pressed.
q STATION NAME :
Only displayed when the search mode is set to
PRESET and the station name has been registered.
e PTY :
The programme type of the tuned in broadcast is
displayed.
r CT :
The current time is displayed.
w PS :
The programme service name and frequency of the
station tuned in is displayed.
The above is an example for when there is TP
data but no RT data.
• When the “STATION NAME” is not registered, q is not
displayed.