Operation
9
ENGLISH
ENGLISH
Auto tuning (FM/AM)
3
Press the TUNING
••
,
ªª
button.
• Auto tuning starts.
•Press the TUNING
••
button to automatically switch to
higher frequencies, the TUNING
ªª
button to
automatically switch to lower frequencies.
1
Press the BAND button to select “FM” or
“AM”.
2
Press the AUTO/MANU button to set “AUTO”.
• When the auto tuning mode is set, “AUTO” appears
to the right of the frequency on the display.
• The TUNED indicator lights and tuning stops when a
frequency whose strength is at or above a specific level is
tuned in.
• The STEREO indicator lights when a stereo broadcast is
received on the FM band.
Manual tuning (FM/AM)
1
Press the BAND button to select “FM” or
“AM”.
2
Press the AUTO/MANU button to set the
manual tuning mode.
• When the manual tuning mode is set, the word
“AUTO” shown to the right of the frequency on the
display turns off.
3
Press the TUNING
••
,
ªª
button.
•Press and hold in the TUNING
••
button to move to
higher frequencies, the TUNING
ªª
button to move to
lower frequencies.
• Use the manual tuning mode to tune in stations whose
signal is too weak to tune in using the auto tuning mode.
• In the manual tuning mode, the signals are forcibly set to
monaural, and the STEREO indicator does not light even when
receiving stereo broadcasts on the FM band.