498669
83
Zoom out
Zoom in
Previous page
1/98
Next page

ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Playback
(Basic)
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
GiPodH
Symptom Cause/Solution Page
iPod cannot be
played.
Check the iPod connections.
Plug the control dock for iPod’s AC adapter into a power outlet.
Switch the input source to “AUX1”.
If using an iPod connected to the USB terminal, incompatible iPod
types cannot be played back.
14
20
14
The file names
are not displayed
properly (“...”, etc.).
Characters that cannot be displayed on this unit are replaced by
z”.
22
“Connection Error”
is displayed.
Unable to communicate properly. Turn off the power to this unit,
disconnect the iPod and then reconnect it.
“Not Support” is
displayed.
The iPod connected to the unit is not compatible. Please make
sure the iPod you are connecting is compatible.
The software version of the connected iPod is an old one. Please
update to the latest version.
14
“Communication
Error” is displayed.
The iPod is not responding.Turn off the power to this unit,
disconnect the iPod and then reconnect it.
GRemote Control UnitH
Symptom Cause/Solution Page
The set cannot be
operated with the
remote control unit.
Batteries are worn out. Replace with new batteries.
Operate the remote control unit within a distance of about 7 m
from this unit and at an angle of within 30°.
Remove any obstacle between this unit and the remote control
unit.
Insert the batteries in the proper direction, checking the q and
w marks.
The set’s remote control sensor is exposed to strong light (direct
sunlight, inverter type fluorescent bulb light, etc.). Move the set
to a place in which the remote control sensor will not be exposed
to strong light.
Set the remote control unit’s device selection switch properly.
67
67
67
61
NOTE
Some function may not be used in some operation status and this is not failure of the unit. Read the
description in this Owner’s Manual for details on correct operations.
The volume may differ from disc to disc. This is due to the differences in how the signals are recorded
on the disc, and is not a malfunction.
Some functions are prohibited on some discs.
Resetting the Microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
9
SOURCEON/STANDBY
1
During standby, press ON/STANDBY while pressing 9 and SOURCE
simultaneously.
2
Once the display starts ashing at intervals of about 1 second, release the two
buttons.
After “INITIALIZED” is displayed on the screen, the “FIRST SETUP” screen is displayed
automatically.
If in step 2 the display does not flash at intervals of about 1 second, start over from step 1.
Attaching the Door
If the door on the front panel comes off, reattach it as shown below.
q
w
e
The illustration shows how to attach the door on
the left. The process for attaching the door on the
right is the same.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon S-5BD - Cara at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon S-5BD - Cara in the language / languages: English as an attachment in your email.

The manual is 17,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon S-5BD - Cara

Denon S-5BD - Cara User Manual - German - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info