498669
45
Zoom out
Zoom in
Previous page
1/98
Next page

ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Playback
(Basic)
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
1
Set the HDMI output connector corresponding with
the HDMI control function.
On the GUI menu, set “Manual Setup” “HDMI Setup”
“HDMI Control” (vpage 57).
2
Turn the power on for all the equipment connected
by HDMI cable.
3
Set the HDMI control function for all equipment
connected by HDMI cable.
Set “HDMI Control” – “Control” (vpage 57) to “ON“.
Please consult the operating instructions for the connected
equipment to check the settings.
Carry out steps 1 and 2 should any of the equipment be
unplugged.
4
Switch the television input to the HDMI input
connected to this unit.
5
Switch the unit input to the HDMI input source and
check if the picture from the player is ok.
6
When you turn the TV’s power to standby, check
that the power of this unit also goes to standby.
If the HDMI control function does not operate properly, check the
following points.
Is the TV compatible with the HDMI control function?
Is the “HDMI Control” – “Control” (vpage 57) set to “ON”?
Is the “Power Off Control” (vpage 57) set to “ON”?
Are the HDMI control function settings of all equipment correct?
(Step 3)
Convenient Functions
HDMI Control Function
When you make an HDMI connection with a TV compatible with
this unit and HDMI control functions, you can perform the following
operations by setting the HDMI control function of each device.
The unit power off can be linked to the TV power
off step.
When you set “Output audio from amp” in the TV audio output
setup operation, you can switch the amp power on.
You can switch audio output devices with a TV
operation.
You can adjust the unit volume in the TV volume
adjustment operation.
You can switch the unit input source through
linkage to TV input switching.
When playing the player, the unit input function
switches to the function of that player.
n
n
n
n
n
NOTE
When “HDMI Control” is set to “ON”, it consumes more standby
power.
The HDMI control function controls operations of a TV that is
compatible with the HDMI control function. Make sure that the TV
and HDMI are connected when you perform HDMI control.
Some functions may not operate depending on the connected TV.
Check the owner’s manual of each device for details beforehand.
When “HDMI Setup” “HDMI Control” “Power Off Control” on
the GUI menu is set to “OFF” (vpage 57), this unit is not set to
standby even if the connected device is in the standby mode.
When connection changes are implemented, such as adding
connections to HDMI devices, linked operations may be initialized.
In this case, you will need to reconfigure the settings.
One Touch Play Function
When this unit is in standby mode and contains a disc, the following
sequence of playback operations can be performed automatically
simply by pressing ONE TOUCH PLAY.
This unit and TV turn on.
This unit’s input source switches to “BD/SD”.
The TV input switches to this unit’s input.
Disc playback starts.
Setting Requirements
To use this function, connect this unit and the TV with an HDMI
cable and turn on the HDMI control function on both devices.
Set “Manual Setup” – “HDMI Setup” “HDMI Control” (vpage
57) on the GUI menu on this unit to “ON”.
Press ONE TOUCH PLAY.
Front
NOTE
The One touch play function will not operate if another device is
connected between this unit and the TV. Connect this unit directly
to the TV.
n
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon S-5BD - Cara at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon S-5BD - Cara in the language / languages: English as an attachment in your email.

The manual is 17,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon S-5BD - Cara

Denon S-5BD - Cara User Manual - German - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info