3
Use <+/–>, [TUNING +/–] or [o p] to select the
reception frequency.
When a station is received, the “TUNED” indication will light.
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far from
the TV as possible.
Display of the FM broadcast reception status
• When the reception band mode is set to “FM AUTO” and a stereo
broadcast is tuned in, the “ST” indicator lights.
• If the signal is weak and stable stereo reception is not possible, set
the reception band mode to “FM MONO” and receive the program
in monaural. The “MONO” indicator lights.
Main unit <+/–> button
There are two, switchable modes fo <+/–> the tuning mode for setting
the reception frequency (setting upon purchase), and the preset mode
for selecting the preset broadcast station.
n Switching the preset mode
Pressing <+> while pressing in <BAND>.
“PRESET” is flashes for approximately 5 seconds.
n Switching the tuning mode
Pressing <–> while pressing in <BAND>.
“TUNING” is flashes for approximately 5 seconds.
Auto tuning
When [TUNING +/–] or [o p] is pressed and held in, the set automatically
starts searching for a broadcast station.
b Stations whose signal is weak cannot be tuned in.
To stop the auto tuning
Press [TUNING +/–] or [o p].
Manual tuning
The reception frequency changes each time [TUNING +/–] or [o p] is
pressed.
Naming the Currently Tuned in Broadcast
Station and Presetting it
Up to 60 stations (total for AM and FM) can be preset.
Names of up to 8 characters can be input.
1
Tune in the broadcast station
2
Press [MEMO] twice.
The name input mode is set.
3
Use [ui] to select the character, then press
[ENTER].
b Characters that can be input.
A to Z, 0 to 9 + [CALL] for small letters
! “ # $ % & ’ ( ) * + , – . / : ; < = > ? @ [ \ ] ˆ _ { ¦ } (space)
b Press [o p] to move the cursor.
Use this to correct input characters.
b To cancel character input, press [MEMO].
Everything that has been input is canceled.
4
Once you are nished inputting, press [ENTER].
“P0 –” flashes on the preset number display.
5
Use [ui] to select the number, then press [ENTER].
Or use [NUMBER] (0 ~ 9, +10) to select the number.
The preset number, reception band and reception frequency are
displayed, then the name of the broadcast station appears.
Changing the broadcast station name
q Call out the preset name you want to change, then press [MEMO]
twice.
w Perform steps 3 and 4 at “Naming the currently tuned in broadcast
station and presetting it”.
Playback
