SetupGetting Started Connections Playback Remote Control Information Troubleshooting
ENGLISH
TIMER SETUP
Settings for Timer.
F Menu screen F
a
ONCE TIMER
Settings for once-only timer.
[Selectable items]
DISABLE
: Disable once-only timer.
ENABLE
: Enable once-only timer.
s
EVERY TIMER
Settings for Everyday Timer.
[Selectable items]
DISABLE
: Disable Everyday Timer.
ENABLE
: Enable Everyday Timer.
n Start Time
Set Timer Start Time. (24-hour display)
Example: 12:35
n End Time
Set Timer End Time. (24-hour display)
Example: 13:00
n Function
Select Timer Function.
n Start Time
Set Timer Start Time. (24-hour display)
Example: 12:35
n End Time
Set Timer End Time. (24-hour display)
Example: 13:00
n Function
Select Timer Function.
• Be sure to set the current time if you want to use the timer playback
function.
• When the function is set to “TUNER”, also set the preset number.
• If the times set for the sleep timer, every timer and once timer
overlap, the priority is as follows:
q sleep timer w once timer e every timer
d
CLOCK SETUP
Set Current Time.
The clock is synchronized with the power supply frequency. It may be
off by about 2 to 3 minutes per month.
In such cases, reset the time.
Checking whether or not the timer is enabled
In the standby mode, press the STATUS button.
The status is displayed on the S-102’s display.
(When the once timer is on and the everyday timer is off)
Canceling the timer
Select “DISABLE”.
To turn the timer back on, select “ENABLE”.
Changing the timer settings
Redo the timer setting operation from the beginning.
The previous settings are cleared and replaced with the new settings.
If there has been a power failure
The settings are cleared.
Reset the current time, then make the settings over from the
beginning.
Setting the clock
q Press the o p button to select “TIMER SETUP” icon, then press
the ENTER button.
w Press the ENTER button twice to change the current time.
e Press the uio p button to set the current time, then press the
ENTER button.
r Press the ENTER button to enter the setting.
• To check the current time when the regular display is displayed, press
the STATUS button once.
• The time can be displayed by pressing the STATUS button when the
power is in the standby mode. (When this is done, the set is no
longer in the low power consumption standby mode.)
When pressed twice while the time is displayed, the display turns
off and the set is put back in the low power consumption standby
mode.
Setting the “ONCE TIMER” and “EVERY TIMER”
q Press the o p button to select “TIMER SETUP” icon, then press
the ENTER button.
w Press the ui button to select “ONCE TIMER” or “EVERY TIMER”,
then press the ENTER button.
e Press the ui button to select “ENABLE”.
r Press the uio p button to select start time, end time, and
function, then press the ENTER button.
t Press the ui button to select “EXIT SETUP”, then press the ENTER
button.
The timer is turned on and the timer standby indicator “ ”
lights.
y Press the ON/STANDBY button.
The power indicator turns orange.
