444911
55
Zoom out
Zoom in
Previous page
1/60
Next page

Getting Started Connections Setup Playback Remote Control Information
ENGLISH
Symptom Cause Countermeasure Page
Internet radio
cannot be played.
Ethernet cable is not properly
connected or network is
disconnected.
Program is being broadcast in
non-compatible format.
The computer’s or router’s
firewall is activated.
Radio station is not currently
broadcasting.
IP address is wrong.
Check the connection status.
Only Internet radio programs in
MP3 and WMA can be played on
this set.
Check the computer’s or router’s
firewall settings.
Choose a radio station that is
currently broadcasting.
Check the set’s IP address.
14
37
20, 21
Server is not
found, or it is
not possible to
connect to the
server.
The computer’s or router’s
firewall is activated.
Computer’s power is not turned
on.
Server is not running.
Set’s IP address is wrong.
Check the computer’s or router’s
firewall settings.
Turn on the power.
Launch the server.
Check the set’s IP address.
20, 21
Cannot connect to
preset or favorite
radio stations.
Radio station is not currently
broadcasting.
Radio station is not currently in
service.
Wait a while before trying again.
It is not possible to connect to
radio stations that are no longer
in service.
For some
radio stations,
“Server Full”
or “Connection
Down” is
displayed and
station cannot be
connected to.
Station is congested or not
currently broadcasting.
Wait a while before trying again.
Sound is broken
during playback.
Network’s signal transfer speed
is slow or communications lines
or radio station is congested.
This is not a malfunction. When
playing broadcast data with a
high bit rate, the sound may
be broken, depending on the
communications conditions.
Sound quality is
poor or played
sound is noisy.
File being played has a low bit
rate.
This is not a malfunction.
GWireless LANH
Symptom Cause Countermeasure Page
Cannot connect
to network.
The settings of the SSID
and network key (WEP) are
incorrect.
The reception is poor and the
signals cannot be received.
There are multiple networks and
the usable channels overlap.
Match the network settings with
the S-302’s settings.
Shorten the distance from the
wireless LAN’s access point,
remove any obstacles and
otherwise improve visibility, then
try reconnecting. Also install
away from microwave ovens
and the access points of other
networks.
Set the access point’s channel
settings away from the channels
used for other networks.
Alternatively, connect using a
network cable.
21
Played sound is
interrupted or
sound cannot be
played.
There are multiple networks and
the usable channels overlap.
Set the access point’s channel
settings away from the channels
used for other networks.
Alternatively, connect using a
network cable.
Troubleshooting
1.S-302E2_1st.indd 55 2007/07/30 20:01:58
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon S-03 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon S-03 in the language / languages: Dutch as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info