29820
13
Zoom out
Zoom in
Previous page
1/74
Next page
ENGLISH
13
You can preset up to 40 FM/AM stations.
You can name the preset stations (up to 8 characters each).
Presetting or naming radio stations
(This operation is only possible from the remote control unit.)
To change a preset station name, press the CH+(9)/ CH–(8) to display the preset station
you want to change, then press EDIT and use the same procedure as in step 3 above to
change.
To preset only the frequency of the radio station, start over from step 1. Then press the ENTER/
MEMO button and proceed to steps 5 through 6. The display shows the preset number, band
and frequency.
Flashes
1
Tune in the desired preset station.
2
Press the EDIT button on the remote
control unit.
You can now begin character input.
4
Press the EDIT button to confirm the
names of the preset stations..
3
Press the 9 /8 button until the
desired character appears on the display.
Press the ENTER/ MEMO button on the
remote control unit to store the input
character.
Press the 7 button or the ENTER/
MEMO button to store the input
character. The cursor will move to the
next character space. Repeat step 3 until
all the characters have been stored.
You can move the cursor backward by
pressing the 6 button to make
corrections.
ENTER/MEMO
5
Press the 9 /8 button on the
remote control unit to tune in the
desired preset number.
Next Flashes
6
Press the ENTER/ MEMO button to confirm
the preset station number.
If the following operation is performed when the system power is off, the power automatically
turns on and the radio is played. (Auto on function)
Listening to Preset Stations
Example: Listening to the station preset at number 3
Using the RDS functions
(This operation is only possible from the remote control unit.)
Receiving RDS broadcasts (FM only)
NOTE: If no RDS station is found, “ NO PROGRAM ” is displayed.
1
Press the FUNCTION or
TUNER button to select TUNER
mode.
2
Use the “9” and “8” buttons to select preset
number “3” or press the “3” button on the numeric
keypad to display preset number “P03”.
The “9” and “8” buttons on the main unit can
be selected when the preset mode has been set.
(P
ress the 2 /BAND and + buttons at the same time to
change the Preset mode.)
1
Press the BAND button and set
the FM AUTO.
2
Press the RDS button.
Main unit Remote control unit
3
Press the TU+(7 ) or
TU–(6) button. (auto tuning)
4
The station is tuned in.
Reception frequency
Main unit Remote control unit
Main unit Remote control unitRemote control unit
1.RCD-M33-E3-ENG 05.4.13 5:46 PM ページ 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon RCDM33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon RCDM33 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 7,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon RCDM33

Denon RCDM33 User Manual - German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info