462000

Denon RCD-N7 Manual

39
Zoom out
Zoom in
Previous page
1/58
Next page
33
Getting Started Connections
Basic Operations Advanced OperationsAdvanced Operations TroubleshootingExplanation termsInformation Specifi cations Index
ENGLISH
Setting the others [Other]
Auto Standby
With the Auto standby ON, this unit will automatically enter the
standby mode after about 30 continuous minutes of stop mode with
no operation.
• The default setting is “OFF”.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on the
display. (vpage25 “Menu map”)
2
Use ui to select “Other” – “Auto Standby”, then
press [ENTER], <1/3
ENTER
> or p.
3
Use ui to select “On”, then press [ENTER], <1/3
ENTER
> or p.
The setting is entered.
NOTE
In the following situations, the Auto standby function does not operate.
• During CD playback or pause.
• When an iPod or USB memory device is connected to the USB port
on the unit. When an iPod is connected to the iPod dock on the unit.
• When the input source is “TUNER”, “AUX1”, “AUX2” or “AUX3”.
• When the input source is “Portable In” and a devices connected to
the Portable In jack.
• When the input source is “AUX3” and a signal is input.
• When the input source is “INTERNET RADIO”, “MUSIC SERVER” or
“ONLINE MUSIC”, and a ethernet cable is connected to NETWORK
connector.
Screen Saver
Use the following procedure to set the screen saver.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display. (vpage25 “Menu map”)
2
Use ui to select “Other” – “Screen Saver”, then
press [ENTER], <1/3
ENTER
> or p.
“Screen Saver” menu appears.
3
Use ui to select “ON”, then press [ENTER], <1/3
ENTER
> or p.
Using an optimizing fi lter
An optimizing fi lter suited for the properties of the speakers (SC-N7)
can be used.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display. (vpage25 “Menu map”)
2
Use ui to select “Other” – “Speaker Optimize”,
then press [ENTER], <1/3
ENTER
> or p.
“Speaker Optimize” menu appears.
3
Use ui to select “ON”, then press [ENTER], <1/3
ENTER
> or p.
ON
: The response is optimized for the speakers (SC-N7, sold
separately).
OFF
: The response is fl at.
Firmware Update
• In order to use these functions, you must have the correct system
requirements and settings for a broadband Internet connection
(vpage8).
• Perform the fi rmware update operation after at least 2 minutes has
elapsed since turning this unit’s power ON.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display. (vpage25 “Menu map”)
2
Use ui to select “Other” – “Firmware Update”,
then press [ENTER], <1/3
ENTER
> or p.
[Selectable items]
Check for Update
: Check for fi rmware updates. You can also check
approximately how long it will take to complete
an update.
Start
: Execute the update process.
• If updating fails, the set automatically retries, but if updating is still
not possible, one of the messages shown below is displayed. If
the display reads as shown below, check the settings and network
environment, then update again.
Display Description
Updating fail Updating failed.
Login failed Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure in connecting to server.
Download fail Downloading of the fi rmware has failed.
[Notes concerning use of “Firmware Update”]
• Do not turn off the power until updating is completed.
• Even with a broadband connection to the Internet, approximately
20 minutes is required for the updating procedure to be completed.
• Once updating starts, normal operations on this unit cannot be
performed until updating is completed.
• Furthermore, updating the fi rmware may reset the backup data for
the parameters, etc. set for this unit.
• If the update fails, remove and re-insert the power cord. “Update
retry” appears on the display and update restarts from the point at
which update failed. If the error continues despite this, check the
network environment.
1.RCDN7E2_ENG_5th_0831.indd 331.RCDN7E2_ENG_5th_0831.indd 33 2010/09/01 15:10:042010/09/01 15:10:04
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon RCD-N7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon RCD-N7 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon RCD-N7

Denon RCD-N7 User Manual - German - 60 pages

Denon RCD-N7 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info