498644
34
Zoom out
Zoom in
Previous page
1/63
Next page
31
If a problem occurs first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. If the problem persists,
there may be a malfunction.
In this case, disconnect the power immediately and contact your retail outlet.
GGeneralH
Symptom Cause Countermeasure Page
Set does not
operate properly.
•External noise or interference is
causing the set to malfunction.
•Reset the microprocessor.
23
Display not lit
and sound not
produced when
power switched
to on.
•Power cord not plugged in
securely.
•Check the connections on
the set's rear panel and the
connection of the power plug to
the power outlet.
6
Display lit but
sound not
produced.
•Wrong input source selected.
•Volume control set to minimum.
•MUTING is on.
•Select the appropriate input
source.
•Turn volume up to suitable level.
•Switch off MUTING.
10
10
10
Display is off. •The Dimmer setting is set to
“OFF”.
•Set to something other than
“OFF”.
10
Power turns off
suddenly and
power indicator
flashes red.
(Flashes at 0.5
second intervals)
•Protection circuit activated due
to a rise in internal temperature.
•Core wires of two speakers
are touching each other or a
core wire is sticking out of
the terminal and touching the
set’s rear panel, activating the
protection circuit.
•Turn off the power, wait for the
set to fully cool down, then turn
the power back on.
•Place the set in a well-ventilated
location.
•First unplug the power cord,
then twist the core wires tightly
or terminate the speaker cables,
then reconnect.
31
II
4
Power turns off
suddenly and
power indicator
flashes red.
(Flashes at 0.25
second intervals)
•Set is damaged. •Turn off the power and contact
a DENON service center .
Troubleshooting
Explanation terms
A
AAC (Advanced Audio Coding)
This is an internationally standardized audio data
compression scheme. It has a compression ratio 1.4
times higher than the “MP3” audio compression
scheme adopted for “MPEG-1”.
B
Bit rate
This expresses the read amount per 1 second of
video/audio data recorded in a disc.
D
Dynamic range
The difference between the maximum undistorted
sound level and the minimum sound level that is
discernible above the noise emitted by the device.
F
Finalize
This is processing that enables playing back of disc
of CD, which was recorded using a recorder, by
other players.
M
MP3 (MPEG Audio Layer-3)
This is an internationally standardized audio data
compression scheme, using the “MPEG-1” video
compression standard. It compresses the data
volume to about one eleventh its original size while
maintaining sound quality equivalent to a music CD.
MPEG (Moving Picture Experts Group), MPEG-2,
MPEG-4
These are the names for digital compression format
standards used for the encoding of video and audio.
Video standards include “MPEG-1 Video”, “MPEG-
2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio
standards include “MPEG-1 Audio”, “MPEG-2
Audio”, “MPEG-4 AAC”.
P
Protection circuit
This is a function to prevent damage to components
within the power supply when an abnormality
such as an overload, excess voltage occurs or
temperature for any reason.
In this unit, the power indicator blinks and the unit
enters standby mode when an abnormality occurs.
S
Sampling frequency
Sampling involves taking a reading of a sound wave
(analog signal) at regular intervals and expressing
the height of the wave at each reading in digitized
format (producing a digital signal).
The number of readings taken in one second is
called the “sampling frequency”. The larger the
value, the closer the reproduced sound is to the
original.
Speaker impedance
This is an AC resistance value, indicated in Ω
(ohms). Greater power can be obtained with this
value smaller.
W
WMA (Windows Media Audio)
This is audio compression technology developed by
Microsoft Corporation.
WMA data can be encoded using Windows Media
®
Player Ver.7, 7.1, Windows Media
®
Player
for Windows
®
XP and Windows Media
®
Player 9
Series.
To encode WMA files, only use applications
authorized by Microsoft Corporation. If you use
an unauthorized application, the file may not work
properly.
Preparations
Operations
Informations
v See overleaf
DISC
34


Need help? Post your question in this forum.

Forumrules
1

Forum

denon-rcd-m39

Reset search

  • how do i set up the tuner using the remote for preset radio stations
    Submitted on 21-8-2021 at 22:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon RCD-M39 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon RCD-M39 in the language / languages: English as an attachment in your email.

The manual is 9,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon RCD-M39

Denon RCD-M39 Quick start guide - English - 9 pages

Denon RCD-M39 User Manual - German - 42 pages

Denon RCD-M39 User Manual - Dutch - 42 pages

Denon RCD-M39 Quick start guide - Spanish - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info