498784
37
Zoom out
Zoom in
Previous page
1/39
Next page
Specifications
ENGLISH
3
Getting Started Removing the Speaker NetConnections
Removing the Speaker Net
CAUTION
Be sure to turn the amplifier’s power off before connecting the
speakers to the amplifier.
If the polarities are inverted, the phase may be off and the sound
may have no bass component, making it seem unnatural. Be sure to
connect the polarities properly.
Connections
When connecting, be sure to read the amplifiers owner’s manual
carefully and connect properly.
Connect the input terminals on the rear panel of the speaker with the
speaker output terminals on the amplifier, using the speaker cables
(Supplied).
Connect the speaker for the left channel to the “L” terminal on the
amplifier, the speaker for the right channel to the “R” terminal on the
amplifier, making sure to check the polarities (“+” and “–”).
There are various types of speaker output terminals on amplifiers.
Check your amplifier’s owner’s manual.
Connections
Once connections are completed, pull gently on the speaker cables to
check that they are securely connected.
CAUTION
Do not let the core wires of two speaker cables touch each other.
Doing so will short-circuit the amplifier circuitry and damage the
amplifier.
1
Twist rmly the wires by hand so
that they do not stick out and cause
short-circuits.
2
Loosen the terminal by turning to the left and insert
the speaker cable through the hole in the speaker
terminal.
3
Tighten the terminal by turning to the right and check
that the core wire is not protruding from the hole.
Connect to amplifiers
“+”side: Plain core
Connect to amplifier’s
“–” side: Striped core
“–” side
terminal: Black
“+” side terminal: Red
Use the included speaker cable to connect the input terminals on the
back of the speakers to the amplifier’s speaker output terminals.
The net on the front of the speakers can be removed.
To remove, grasp both sides of the net and pull forward.
To mount, line up the projecting pieces in the four corners of the
speaker net with the holes in the four corners of the cabinet and
press in.
Sheath
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon RCD-M37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon RCD-M37 in the language / languages: English as an attachment in your email.

The manual is 5,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon RCD-M37

Denon RCD-M37 User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info