68410
31
Zoom out
Zoom in
Previous page
1/35
Next page
Getting Started Connections Setup Playback Setting the Timer Troubleshooting
ENGLISH
Specifications

Last Function Memory
This stores the settings as they were directly before the standby
mode was set.
When the power is turned back on, the settings are restored to as
they were directly before the standby mode was set.
Resetting the Microprocessor
Perform this procedure if the display is abnormal or if operations
cannot be performed.
When the microprocessor is reset, all the settings are reset to
their default values.
1
Unplug the power cord.
2
Plug the power cord into a power outlet while pressing
<+/9> and <SOURCE> simultaneously.
3
After about 15 seconds “RESET” is displayed to
indicate that the microprocessor has been reset.
If “RESET” is not displayed in step 3, start over from step 1.
Convenient Functions
Auto Power On
When the power is in standby, the power turns on when any of
the buttons below other than ON/STANDBY is operated, and the
respective operation is performed.
<2/5> ··············The disc tray opens.
1/3 for the different functions
························
Playback of that source starts.
[TUNER] ············Playback of the tuner starts.
[2] ··················· Change the function to “CD” and switch the
power on.
[PHONO] ··········· Change the function to “PHONOand switch
the power on.
[LINE1/LINE2] ···· Change the function to the finally set “LINE”
and switch the power on.
NOTE
When the iPod can be played, press [iPod 1/3] to start iPod
playback.
Auto Function Selector Function
When one of the buttons below is pressed, the function switches
to the respective function and playback of that source starts.
1/3 ················· The function switches to “CD” and the CD
starts playing.
[2] ··················· The function switches to “CD” and the stop.
[iPod 1/3] ········ The function switches to “iPod” and the iPod
starts playing.
[TUNER] ············ The functions switches to “TUNER” and the
band last set is tuned in.
Other Functions
Other Functions
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon RCD-CX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon RCD-CX1 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon RCD-CX1

Denon RCD-CX1 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info