122765
19
Zoom out
Zoom in
Previous page
1/32
Next page
Getting Started Network
function
Troubleshooting Specifications

PC
Application
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT, then press [EDIT FUNC].
3
Press [MOVE/SWAP].
4
Press NEXT.
5
At the “Source Device” screen, press the
LCD button for the device of the button you
want to move.
6
At the “Select Key” screen, press the LCD
button of the button you want to move.
7
Press NEXT.
8
At the “Target Device” screen, press the
LCD button of the device for the destination
or the button to be swapped.
9
At the “Select key” screen, press the LCD
button for the destination or the button to
be swapped.
10
Press [YES].
The button moves or is replaced.
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
Editing buttons
Use this procedure to move, copy and insert buttons.
Moving or swapping buttons
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT, then press [EDIT TEXT].
3
Press [DEVICE NAME].
4
At the “Select Device” screen, press the LCD
button for the device (equipment) whose
name you want to change.
5
Press NEXT.
6
At the “Edit Text” screen, use the rst
column of LCD buttons to select the position
of the character to be edited.
7
Select the character to be input with the
second column of LCD buttons, then press
[SELECT].
b Lower case letters are input when [CAPS] is displayed,
capital letters when [lower] is displayed.
Up to 12 characters can be input.
8
Press [SAVE].
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
Changing the device name
Operation
Setting the remote control code transmission
mode (In the case of RF)
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT, then press [EDIT DEVICE].
3
Press NEXT.
4
Press [IR/RF].
5
Press NEXT.
6
At the “Select Device” screen, press the LCD
button for the device whose transmission
mode you want to change.
7
Press NEXT.
8
Press [RF], then press [YES].
[RF] :
The codes are sent as radio waves.
b The setting at Adding nodes” (vpage 23) must be
made in order to add [RF].
9
Press NEXT.
b When [RF] is selected, the RC-7001RCI (sold separately)
node number is displayed. Press LCD button.
10
Press [YES].
The transmission mode is set.
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon rc 7000 ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon rc 7000 ci in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon rc 7000 ci

Denon rc 7000 ci User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info