122765

Denon rc 7000 ci Manual

13
Zoom out
Zoom in
Previous page
1/32
Next page
Getting Started Network
function
Troubleshooting Specifications
PC
Application
Using the code search function
This function lets you search for preset codes when
adding new devices (equipment) to the remote control
unit.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press [BASIC SETUP].
3
Press [CODE SEARCH].
4
Press NEXT.
5
At the “Press Device Type” screen, press
the LCD button for the device (equipment)
whose code you want to search for.
6
Press NEXT twice.
7
If the device (equipment) operates when the
remote control unit’s buttons are pressed,
press [YES].
b If [NO] is pressed, the code switches. Press a remote
control unit button again to check. Press [BACK] to return
to the previous code.
8
At the “Select Position” screen, press the
LCD button for the position at which you
want to add the preset device (equipment).
b Press [NO] to end, [YES] to continue.
8
Press RC SETUP.
The registration menu is displayed.
9
Press [SAVE] to register the set macro.
[TEST] :
Press this to send the registered macro to check it.
[– DELAY +] :
Use these to set the transmission interval. This can be set
to between “0.05(MIN)” and “60(MAX)”. (Initial setting: 0.25
seconds)
[CANCEL ENTRY] :
Press this to cancel the
last code registered and return to
the registration mode.
[START OVER] :
Press this to
start over from the beginning.
10
Press [EXIT] to end the setting.
b Press [EDIT] if you want to change the button name
(macro name).
Perform the procedure at “Changing the button name”
(vpage 18) starting from step 7.
Using the delay time function
The interval at which the remote control signals
registered with the system call function are sent (the
“delay time”) can be set.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press [MACROS].
3
Press [EDIT DELAY].
4
Press NEXT twice.
5
The “Edit Macro” screen is displayed.
Select a macro that has been registered.
6
Press NEXT.
7
Use [– DELAY +] to change the delay time,
then press [SAVE].
[TEST] :
Press this to send the registered macro to check it.
[– DELAY +] :
Use these to set the transmission interval.
[CREATE AGAIN] :
The macro registration screen reappears.
8
Press [EXIT] to end the setting.
Operation
NOTE
The macro setting button cannot be registered in a macro.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon rc 7000 ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon rc 7000 ci in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon rc 7000 ci

Denon rc 7000 ci User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info