578715
44
Zoom out
Zoom in
Previous page
1/60
Next page
ENGLISHENGLISH
40
Auto standby
With the auto standby on, this unit will automatically enter the standby
mode after about 30 continuous minutes of stop mode with no
operation.
1
Press SETUP.
2
Use ui to select “AUTO
STANDBY”, then press ENTER
or p.
3
Use ui to select “ON”, then press ENTER or p.
The setting is entered.
NOTE
In the following situations, the Auto standby function does not operate.
When an iPod or USB memory device is connected to the USB1 port
on the unit.
When the input source is “TUNER”, “AUX1” or “AUX2”.
When the input source is “AUX1/DOCK”, and an iPod is connected
to control dock for iPod. (ASD-11R only)
When the input source is “PORTABLE IN” and a device is connected
to the portable jack.
Other functions
Auto power on
When the power is in standby, the power turns on when any of the
buttons below other than POWER ON on the remote control unit
or ON/STANDBY on the main unit is operated, and the respective
operation is performed.
5
The disc tray opens.
1 or 1/3
The input source selected directly
before the power was switched to
standby is played back.
If the last input source was “DISC/
USB2”, “AUX1”, “AUX2” or
“PORTABLE IN”, the disc set in the
main unit is played back. (Certain
types of disc cannot be played
back.)
When the control dock for iPod
is connected to the AUX IN 1
connectors and the input source is
“AUX1/DOCK”, the control dock
for iPod starts playing when 1 is
pressed.
DISC
The input source switches to “DISC/
USB2” and the disc starts playing.
(When “Optical Disc AutoPlay”
(vpage34) is “On”)
TUNER
Playback of the tuner starts.
USB1/iPod
The input source switches to “USB1/
iPod” and the USB memory device
starts playing.
AUX
The input source switches to “AUX”.
Last function memory
This stores the settings as they were immediately before going into
the standby mode.
When the power is turned back on, the settings are restored to as
they were immediately before going into the standby mode.
Registering preset codes
Registering preset codes on the supplied remote control unit will
enable turning on/standby and selecting the input source of your TV
using the remote control.
Use the preset codes table at the end of this manual to register the
preset codes.
Buttons used for operating the TV
TV POWER
TV INPUT
1
Press and hold POWER OFF and
SLEEP for at least 3 seconds.
The signal transmission indicator flashes
twice.
2
Press 0 9 and input the 4-digit
number of the brand of the
component to be preset. The
numbers are shown in the preset
code table (vEnd of this
manual).
Some manufacturers use more than one type of remote control code.
Refer to the included list of preset codes to change the number and
verify correct operation.
The default setting is “Sony”.
NOTE
Depending on the model and year of manufacture of your equipment,
some buttons may not operate.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon RBD-X1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon RBD-X1000 in the language / languages: English as an attachment in your email.

The manual is 9,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon RBD-X1000

Denon RBD-X1000 User Manual - German - 60 pages

Denon RBD-X1000 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info