578715
17
Zoom out
Zoom in
Previous page
1/60
Next page
Getting
Started
Basic
Connections
Advanced
Connections
Basic
Operations
Advanced
Operations
Other
setting
Settings
Other
information
Explanation
terms
Troubleshooting Specifications Index
ENGLISHENGLISH
13
Basic
Operations
Operations possible during playback
Adjusting the master volume
Use VOL df to adjust the volume.
The volume level is displayed.
GAdjustable rangeH
VOLUME 00 – 59, VOLUME MAX
The variable range differs according to the
input signal.
You can also operate via the main unit.
In this case, perform the following
operations.
Turn VOLUME to adjust the volume.
Turning off the sound temporarily
Press MUTE.
“MUTE ON” is displayed.
To cancel, press MUTE again. Muting can also be canceled by adjusting
the master volume.
Switching the display’s brightness
Press DIMMER.
100 % 70 %
40 %Off
The display’s brightness switches each
time the button is pressed.
Adjusting the tone
1
Use SDB/TONE to select the tone
parameter to be adjusted.
SDB BASS
TREBLE
2
Adjust the volume with 8
9 or o p.
To make other tone adjustments at this
time, press SDB/TONE.
If no operation is performed for 5 seconds,
the adjustment is retained and the normal
display reappears.
SDB
Emphasize the bass sound. (Super Dynamic Bass)
GSelectable modesH
ON
OFF
BASS
Adjusts the bass sound.
GVariable rangeH
–10dB
+10dB
TREBLE
Adjusts the treble sound.
GVariable rangeH
–10dB
+10dB
Settings made upon purchase:
SDB .......................................OFF
BASS ..................................... 0dB
TREBLE ................................. 0dB
SDB and BASS can be set simultaneously. If the settings were
performed at the same time, the BASS variable range may differ
depending on the volume level.
Listening with headphones
Plug the headphones (sold
separately) into the PHONES.
The sound from the speakers is
automatically cut off.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
Source direct mode
As the audio signal does not pass through the tone control circuit (SDB/
BASS/TREBLE) in source direct mode, the playback reproduction is
closer to the original sound.
Press S.DIRECT.
If SOURCE DIRECT on the main unit is pressed, the same function
as with the remote control unit can be obtained.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon RBD-X1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon RBD-X1000 in the language / languages: English as an attachment in your email.

The manual is 9,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon RBD-X1000

Denon RBD-X1000 User Manual - German - 60 pages

Denon RBD-X1000 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info