578715
12
Zoom out
Zoom in
Previous page
1/60
Next page
ENGLISHENGLISH
8
This section explains how to connect speakers, TV, set-top box, antennas and power cord.
For other connections, see the sections below.
n Connecting a control dock for iPod (vpage24)
n Connecting an iPod or USB memory device to the USB1/iPod port (vpage25)
n Connecting a USB memory device to the USB2 port (vpage25)
n Connecting a portable audio player (vpage25)
n Connecting to the network (vpage26)
NOTE
Do not plug in the power cord until all connections have been completed.
When making connections, also refer to the owner’s manual of the other components.
Be sure to connect the left and right channels properly (left with left, right with right).
Do not bundle power supply cords together with connection cables.
Doing so can result in humming or noise.
Basic connections
Connecting speakers
Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being
connected to the unit, and be sure to connect the channels and polarities correctly.
Cables used for connections
Audio cable (sold separately)
Pin-plug cable
Speaker cable
Connecting the speaker cables
Protection circuit
The protection circuit is be activated in the
following situations:
If the speaker cable wire touches the rear panel
or screws or if the speaker cable wire touches
the speaker cable’s + and – sides are touching
If the surrounding temperature is extremely
high
If the inside of the amplifier gets hot to
extended use at a high output
If this happens, unplug the power cord, then check
the connections of the speaker cables and input
cables. If the unit becomes very hot, wait for it to
cool off and improve the ventilation around it. After
doing this, plug the power cord back in.
If the protection circuit is activated even though
there are no problems with the ventilation around
the unit or in connections, the unit may be
damaged. Turn off the power and then contact a
DENON service center.
Peel off about 10 mm of sheathing from the tip
of the speaker cable, then either twist the core
wire tightly or terminate it.
NOTE
Use speakers with an impedance of 6 to 16 Ω.
The protection circuit may be activated if speakers
with an impedance other than specified are used.
Connect the speaker cables so they do not stick
out of the speaker terminals. The protection circuit
may be activated if the wires touch the rear panel
or if the + and sides touch each other (vpage43
“Protection circuit”).
Never touch the speaker terminals while the
power supply is connected. Doing so could result
in electric shock.
(R) (L)
IN
w q w q
Speaker SC-X1000
Subwoofer
with built-in
amplifier
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon RBD-X1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon RBD-X1000 in the language / languages: English as an attachment in your email.

The manual is 9,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon RBD-X1000

Denon RBD-X1000 User Manual - German - 60 pages

Denon RBD-X1000 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info