584590
20
Zoom out
Zoom in
Previous page
1/23
Next page

Setup
ENGLISH
Other Operations
NOTE
When the “POWER CONFIGURATION” is set to “MASTER
TRIGGER”, the device will automatically enter the standby status
when no trigger input is detected for a period of 10 minutes.
When the “POWER CONFIGURATION” is set to ON LINE”, send
a standby command to the ETHERNET terminal or the RS-232C
terminal of the POA-3012CI.
Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, unplug the power cord from the
power outlet.
Check the Status of Each
Channel
1Press the DISPLAY button.
b Zone status is indicated on the bottom line of the display.
b Turn the SELECT / ENTER knob to change the display as follows.
VOLUME CONTROL level
LOW CUT FILTER
Channel No. & INPUT Line
ZONE T.ON MODE
2Press the DISPLAY button again.
b System status is indicated on the bottom line of the display.
b Turn the SELECT / ENTER knob to change the display as follows.
POWER CONFIG DIMMER
n To Return to the Regular Display
Press the u / RETURN button until the display returns to normal.
Other Operations During Playback
n To Adjust the Volume
Refer to “VOLUME CONTROL” on the “Main Setup” menu
(vpage 13).
n To Reduce the Low Frequency Volume
Refer to “LOW CUT FILTER” on the “Main Setup” menu (vpage
13).
n To Switch Input Setting
Refer to “INPUT SELECT” on the “Main Setup” menu (vpage
13).
Operating the POA-3012CI Using a
Browser (Web control)
This function lets you operate the POA-3012CI using Internet
Explorer.
1Check the POA-3012CI’s IP Address.
“Network Setup”“Network Information” (vpage 14)
2Input the POA-3012CI’s IP Address in Internet
Explorer.
For example, if the IP address is “10.3.18.90”, enter
http://10.3.18.90.
3If the top menu is displayed, click “Setup Menu”.
4When the “Setup Menu” is displayed, click on the
menu you want to operate.
Turning the Power On
Press the ON / STANDBY button.
The power indicator fl ashes green and the power turns on.
b The signal input to each channel is output from the speaker
terminal of each channel.
b The setting status of each channel is indicated on the display.
b Turn the SELECT/ENTER knob to change the channel displayed.
CH 1&2
BTL
BUS L+R
0.0dB
Output channel Input terminal
OPERATION MODE
(No display when in “NORMAL MODE”)
Volume level
n To return to STANDBY
Press the ON / STANDBY button again.
The power indicator lights red.
DISPLAYZONE 5
ON/STANDBY
SELECT/ENTER
u/ RETURN
ZONE operation mode indicators
Click
Setup
Click the menu
CHANNEL SETUP (vExample : 1)
SYSTEM SETUP (vExample : 2)
WARNING AND PROTECTION DATA
(vExample : 3)
AUDIO SIGNAL AND TRIGGER
INPUT (vExample : 4)
OPTION SETUP (vExample : 5)
Click “SAVE” when you want to save settings,
and click “LOAD” when you want to call settings.
Becomes each operation screen.
Operations
Getting Started Connections Troubleshooting Specifi cationsOperations
1.POA-3012CI_ENG_101.indd 17 2008/07/30 14:08:30
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon POA-3012CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon POA-3012CI in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info