584590
17
Zoom out
Zoom in
Previous page
1/23
Next page

Getting Started Connections Operations Troubleshooting
ENGLISH
Specifications
[Selectable Channels]
[Selectable items]
CONSTANT : The power amplifier operates constantly.
TRIG. IN : The power amplifier operates when trigger input is
detected.
When trigger input is not detected, it remains in
standby mode.
A.SIGNAL : The power amplifier operates when an audio signal is
input.
If no input is received for a period of 10 minutes, it
switches to standby mode.
OFF : Turns the power amplifier off.
The POA-3012CI accepts +3 ~ 30V trigger input.
h
DIMMER MODE
Adjust display brightness of the POA-3012CI.
[Selectable items]
Bright : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
When setting to “Dim”, “Dark” and OFF”, the display brightness
changes to “Bright” for about 3 seconds during the operation before
reverting to the set brightness.
[Selectable items]
POWER BUTTON : Operate with the ON/STANDBY button only.
ON LINE : Operate from an external device via Ethernet
or RS-232C input.
MASTER TRIGGER : Operate by detection of a trigger signal input to
the MASTER TRIGGER input terminal.
Turns on when a signal is detected.
If no input is received for a period of 10
minutes, it switches to standby mode.
g
ZONE TRIGGER ON MODE
Sets the operating specifications for the power amplifiers
of each ZONE.
For details of the channels which can be set in each mode, see
GSelectable ChannelsH in “f OPERATION MODE” (vpage 13).
j
POWER CONFIGURATION
Select the method for turning on the POA-3012CI.
The POA-3012CI accepts +3 ~ 30 V trigger input.
Even when ON LINE” or “MASTER TRIGGER” has been set, power
source operation is possible by means of ON / STANDBY button.
Setup
OFF : Display is off unless controls are operated.
Network Setup
Make network settings.
F Menu tree F
Main Setup
Network Setup
a Network Information
s Network Setup
a
Network Information
Display network information.
[Items to be checked] DHCP= ON or OFF IP Address
MAC Address
If you are using a broadband router (DHCP function), there is no need
to make the settings at “Setting the IP Address” and “Setting the
Proxy”, since the DHCP function is set to “ON” in the POA-3012CI’s
default settings.
If the POA-3012CI is being used connected to a network without the
DHCP function, the network settings must be made. In this case,
some knowledge of networks is required. For details, consult a
network administrator.
If you cannot connect to the Internet, recheck the connections and
settings (vpage 8).
If you do not understand about Internet connection, contact your ISP
(Internet Service Provider) or the store from which you purchased
your computer.
DHCP (Dynamic Host Configuration Protocol) :
These are systems by which the IP address and other network
settings are automatically set for the POA-3012CI, computer,
broadband router and network devices.
DNS (Domain Name System) :
This is a system for converting the domain names used when
browsing Internet sites (for example, “www.denon.jp”) into the
IP addresses actually used for communications (for example,
“202.221.192.106”).
1.POA-3012CI_ENG_101.indd 14 2008/07/30 14:08:26
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon POA-3012CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon POA-3012CI in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info