584590
7
Zoom out
Zoom in
Previous page
1/23
Next page
Getting Started Setup Operations Troubleshooting
ENGLISH
Specifications
Audio cables
Audio input connections
(Black)
Pin-plug cable
Businput/output connections (stereo)
(Black)
(Black)
R
L
R
L
Stereo pin-plug cable
Network connections
Ethernet cable
Speaker connections
Speaker cable
Signal direction
Audio signal:
Output
Input
Input
Output
NOTE
Do not plug in the power cord until all connections have been
completed.
When making connections, also refer to the operating instructions of
the other components.
In the case of Bus input / output connections, be sure to connect the
left and right channels properly (left with left, right with right).
Do not bundle power cords together with connection cables. Doing
so can result in humming or noise.
Connections for all compatible audio signal formats are described
in this owner’s manual. Please select the types of connections
suited for the equipment you are connecting.
With some types of connections, certain settings must be made
on the POA-3012CI. For details, refer to the instructions for the
respective connection items below. Cables Used for Connections
Select the cables according to the equipment being connected.The POA-3012CI incorporates six sets of 2-channel amplifier from
ZONE1 to ZONE6.
The same audio signal can be output from all ZONE or separate
signals can be output from each ZONE. The POA-3012CI also supports
BRIDGED output.
Before making the connections, determine the input signals and
output signals for each ZONE and then set up the POA-3012CI in
accordance with the following procedure.
Each Zone input connectors or
BUS input connectors.
Set the input source.
Connect the external device to the input
terminal.
Select the input terminal to use.
“INPUT SELECT(vpage 13)
“Input Connection (vpage 7)
Set the output channel.
Connect the speaker cable.
Select the speaker output method.
“Speaker Connections”
(vpage 5)
OPERATION MODE
(vpage 13)
Before Connecting
n Input Setting
n Output Setting
NORMAL output or BRIDGED
output.
Connections
Connections
Preparations
1.POA-3012CI_ENG_101.indd 4 2008/07/30 14:08:17
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon POA-3012CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon POA-3012CI in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info