498788
9
Zoom out
Zoom in
Previous page
1/17
Next page
5
ENGLISH
Getting started
Basic connections Basic operation Troubleshooting Specifications IndexAdvanced connections Advanced operation Explanation terms
Connections for all compatible audio signal format is
described in this operating instructions. Please select the
types of connections corresponding to the equipment you are
connecting.
NOTE
Do not plug in the power cord until all connections have been
completed.
When making connections, also refer to the operating instructions
of the other components.
Be sure to connect the left and right channels properly (left with
left, right with right).
Do not bundle power cords with connection cables. Doing so can
result in humming or noise.
Do not turn up the volume without a turntable connected to the
PHONO input terminals. Doing so will cause humming or noise.
Preparations
Connecting cables
Select the cables according to the equipment being connected.
Audio cables
Analog connections (stereo)
R
L
R
L
(White)
(Red)
Stereo pin-plug cable
Speaker connections
Speaker cables
NOTE
Connect the speaker cables so they do not stick out of the speaker
terminals. The protection circuit may be activated if the wires touch
the rear panel or if the + and – sides touch each other (v “Protection
circuit”).
Never touch the speaker terminals while the power supply is
connected. Doing so could result in electric shock.
Speaker impedance
Use speakers with impedances within the ranges shown below to
suit how they are used.
Speakers used Impedance
A 4 - 16 Ω
B 4 - 16 Ω
A and B 8 - 16 Ω
Bi-wiring Connection 4 - 16 Ω
Protection circuit
The protection circuit is be activated in the following situations:
If the speaker cable wire touches the rear panel or screws or if the
speaker cable wire touches the speaker cable’s + and – sides are
touching
If the surrounding temperature is extremely high
If the inside of the amplifier gets hot to extended use at a high
output
If this happens, unplug the power cord, then check the connections
of the speaker cables and input cables. If the unit becomes very
hot, wait for it to cool off and improve the ventilation around it. After
doing this, plug the power cord back in.
If the protection circuit is activated even though there are no
problems with the ventilation around the unit or in connections, the
unit may be damaged. Turn off the power and then contact a DENON
service center.
Basic connections
Connecting the speakers
Connecting the speakers cables
Carefully check the left (L) and right (R) channels and + (red) and
(black) polarities on the speakers being connected to the unit, and be
sure to connect the channels and polarities correctly.
1
Peel off about 10 mm of sheathing
from the tip of the speaker cable,
then either twist the core wire tightly
or apply solder to it.
2
Turn the speaker terminal
counterclockwise to loosen it.
3
Insert the speaker cable’s core
wire to all the way into the speaker
terminal.
4
Turn the speaker terminal clockwise
to tighten it.
Speaker terminal dimensions
8mm
5mm
Connecting the audio equipment
Cautions on playing SA sources:
When regular speakers not compatible with SA sources (DVD Audio discs, Super Audio CDs and other sources, including treble components
above the audible range), set the properties of the player (DVD Audio player, Super Audio CD player, etc.) for use with regular speakers (or
amplifiers).
The speakers may be damaged if the volume is set too high when playing SA sources. For instructions on player settings, refer to the
operating instructions included with the player.
Basic connections
1.PMA1510AEE2_ENG_002_5th_0222.indd 5 2010/02/23 15:55:15
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon PMA-1510AE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon PMA-1510AE in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info