668292
7
Zoom out
Zoom in
Previous page
1/51
Next page
7
8. Crossfader Assign: Routes the audio playing on the corresponding channel to either side
of the crossfader (L or R), or bypasses the crossfader and sends the audio directly to the
program mix (center, Thru).
9. Crossfader: Use this crossfader to mix between the two active decks.
10. Channel FX: Use these buttons to apply Effect A and/or B to the corresponding channel
while using Serato DJ. While using Engine or when the Input Selector is set to Line,
Decks 1 and 3 can use FX 1 only, and Decks 2 and 4 can use FX 2 only.
11. Sampler Volume: Turn this knob to adjust the volume level of the sampler in Serato DJ.
12. Master Level Meters: These LEDs display the audio signal level of the master mix (sent
out of the Master Outputs). These levels are post-Master Level, so they are an accurate
measurement of the audio signal sent out of the Master Outputs.
13. Master Level: Turn this knob to adjust the volume level of the Master Outputs.
14. Booth Level: Turn this knob to adjust the volume level of the Booth Outputs.
15. Booth EQ: Turn these knobs to boost or cut the high and low frequencies for the Booth
Outputs.
16. Mic Level: Turn these knobs to adjust the volume levels of the corresponding microphone
inputs. The Peak light next to each knob indicates the current signal level by its color:
green (low), amber (normal/optimal), or red (maximum/peak).
Important: The audio signals from the microphones are routed directly to the Master
Outputs.
17. Mic EQ: Turn these knobs to boost or cut the high and low frequencies for the
corresponding microphones.
18. Echo On/Off: Press this button to activate or deactivate the echo effect on the
microphones’ audio signal.
19. Mic Echo Level: Turn this knob to adjust the amount of the echo effect on the
microphones’ audio signal.
20. Mic On/Off: Press this button to activate or deactivate the microphones.
21. Talkover/Post: Press this button to use the “talkover” feature, which automatically
reduces the volume level of the master mix when you speak into the microphone.
Press and hold Shift and then press this button to activate or deactivate the “post”
feature. When on, the microphones’ signal will not be sent to the Booth Outputs.
22. Phones Level: Adjusts the volume of the headphones.
23. Phones Mix: Adjusts the software’s audio output to the headphones, mixing between the
cue output and the master mix output.
24. Split Cue: When this switch is in the On position, the headphone audio will be “split” such
that all channels sent to cue channel are summed to mono and sent to the left headphone
channel and the master mix is summed to mono and sent to the right channel. When the
switch is in the Off position, the cue channel and master mix will be “blended” together.
25. X-F Link: Press this button to link or unlink the Serato Video crossfader to the audio
crossfader.
26. Deck: Selects which virtual deck is controlled by that hardware deck. The left deck can
control Deck 1 or 3; the right deck can control Deck 2 or 4.
27. Shift: Press and hold this button to access secondary functions of other controls.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon MCX8000 DJ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon MCX8000 DJ in the language / languages: English as an attachment in your email.

The manual is 4,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon MCX8000 DJ

Denon MCX8000 DJ Quick start guide - English, German, French, Italian, Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info