El equipo se apaga y el LED de estado parpadea en rojo
El equipo se apaga y el LED de estado parpadea en rojo.
0Debido al aumento de temperatura en el interior de esta unidad, el circuito de protección se ha activado. Desenchufe el cable de alimentación y espere
una hora más o menos hasta que esta unidad se enfríe lo suficiente. Luego, conecte la alimentación de nuevo.
Conectarse a una red WPS
Conectarse a una red WPS.
0Si su router inalámbrico es compatible con WPS (Wi-Fi Protected Setup™), esta unidad también puede conectarse a la red mediante el método de
botón de comando siguiendo los pasos indicados a continuación:
(Wi-Fi Protected Setup™ es una marca comercial de Wi-Fi Alliance.)
1.Pulse el botón WPS en su router.
2.Antes de que transcurran 2 minutos, mantenga pulsado el botón CONNECT del panel trasero de esta unidad durante 5 segundos.
3.El LED situado en la parte delantera de esta unidad parpadeará en verde durante varios segundos mientras se establece la conexión con el router
WPS.
4.Una vez completada la conexión, el LED situado en la parte delantera de esta unidad se iluminará en azul continuo.
ContenidoConexionesAjustesConsejosLED de estadoApéndice
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Denon Home Subwoofer at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Denon Home Subwoofer in the language / languages: Spanish as an attachment in your email.
The manual is 0.4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
