561507
11
Zoom out
Zoom in
Previous page
1/33
Next page
11
Appendix
TroubleshootingUse
Contents
Setup
Access Point Mode
1
Make sure the Extend is plugged into a wall outlet and
has power (the blue Power LED should be solid blue.)
2
Connect the included Ethernet cable between one of
the two Ethernet jacks on the Extend and your existing
router or switch (the Network LED will be flashing green.)
3
In a few seconds, the Network LED will stop flashing and
turn solid green indicating that the Extend is connected
to your router.
4
HEOS Extend is now operating in Access Point mode.
You can connect to the HEOS Extend by selecting the
network name (SSID) that starts with “HEOS_” and
entering the password printed on the bottom of the
HEOS Extend.
NOTE
The default network name and password are unique for every HEOS
Extend. This information is printed on the bottom of your HEOS Extend.
Access Point mode will automatically be configured with both 2.4 GHz and
5 GHz networks enabled and set to the factory default settings. If you wish
to change any of the default settings, please see the Advanced Settings
section below.
Once your HEOS Extend has been configured in Extender Mode, the
default network name is erased. If you decide to reconfigure your HEOS
Extend in Access Point Mode, the network name (SSID) will be set to the
same name as the network it was previously set to extend. Please see
the Advanced Settings section for instructions about how to change the
network name using the Web UI.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon HEOS EXTEND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon HEOS EXTEND in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon HEOS EXTEND

Denon HEOS EXTEND User Manual - English - 11 pages

Denon HEOS EXTEND Quick start guide - German - 11 pages

Denon HEOS EXTEND User Manual - German - 33 pages

Denon HEOS EXTEND Quick start guide - Spanish - 11 pages

Denon HEOS EXTEND User Manual - Spanish - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info