30412

Denon DVD2910 Manual

25
Zoom out
Zoom in
Previous page
1/42
Next page
25
ENGLISH
3
4
When Image Quality Adjustment 1 Is Selected
and Adjusted:
• Press cursor button (ª), then select the image
quality adjustment item with cursor buttons
(
0, 1), set the adjustment value with cursor
buttons (•, ª), and press the ENTER button.
• All of the adjusted contents will be stored.
CONTRAST (–6 to +6) (Factory default: 0)
• This adjusts the light/dark difference of the
image.
BRIGHTNESS (0 to +12) (Factory default: 0)
• This adjusts the brightness of the image.
SHARPNESS (MID) (–6 to +6) (Factory default: 0)
•This adjusts the sharpness of the image for
the intermediate frequencies.
SHARPNESS (HIGH) (–6 to +6) (Factory default: 0)
•This adjusts the sharpness of the image for
the high frequencies. (Only effective for
progressive images.)
HUE (–6 to +6) (Factory default: 0)
• This adjusts the balance between green and
red. (Not effective for progressive scan output
nor component output.)
CCS (0 to +3) (Factory default: 0)
• This performs removal of the color signal
component for images in which the color
signal component is mixed with the brightness
signal. (Only effective with progressive
images.)
MEMORY 1
12
00000
MH
0
Remote control unit
Remote control unit
When Image Quality Adjustment 2 Is Selected
and Adjusted:
WHITE LEVEL (–5 to +5) (Factory default: 0)
• This adjusts the white level.
CHROMA LEVEL (–6 to +6) (Factory default: 0)
• This adjusts the density of the color.
CHROMA DELAY (–2 to +2) (Factory default: 0)
• This adjusts the shift of the brightness signal
and the color signal of the image. (Only
effective for progressive images.)
(Adjustment between –1 and +1 is possible for
interlaced video.)
DNR (Digital Noise Reduction) (0 to +6) (Factory
default: 0)
• This reduces video noise.
MEMORY 1
12
000
0
Remote control unit
Remote control unit
Select the memory using the 2 cursor buttons
(
0, 1) and press the ENTER button.
IMAGE QUALITY ADJUSTMENT 1
This permits adjustment of the contrast,
brightness, sharpness, tint, and enhancer.
/ Advance to Operation 3.
IMAGE QUALITY ADJUSTMENT 2
This permits adjustment of the setup level,
white level, color density, chroma delay, and
noise reduction. / Advance to Operation 4.
GAMMA CORRECTION
This is selected when dark portions of the
image are obscure, or bright portions are much
brighter than necessary.
/ Advance to Operation 5.
MEMORY 1
12
000
MH
00 0
Remote control unit
Remote control unit
2
When Gamma Correction is Selected and Adjusted:
Two kinds of display are prepared for adjustment of Gamma
Correction.
• When use the Numerical table of Gamma Correction. (Figure 1)
:Pressing the cursor button (ª)
• When use the Graph of Gamma Correction. (Figure 2)
:Pressing the enter button
MEMORY 1
12
24 32 48 80 96 128 160 19264
G0 G1 G2 G4 G5 G6 G7 G8
224
G9G3
Remote control unit
5
Select the adjust point with cursor buttons (0, 1), set the adjustment brightness level with cursor
buttons (•, ª), and press the ENTER button.
(If the PICTURE ADJUST button is pressed before pressing the enter button, an adjustment level is not
stored)
• The brightness level can be adjusted in range of 16 to 235.
•Pressing the cursor button (•) raises the level (and the image becomes brighter), and pressing the
cursor button (ª) lowers the level (and the image becomes darker).
•A press of the CLEAR button returns all of the setting points to the standard level.
✽ The level of the selected point cannot exceed the level of the points above and below that point.
(A dark portion cannot be set to exceed a portion that is brighter than it.)
MEMORY 1
0
0
100
235
GO : 0 24
(Figure 1) (Figure 2)
✽ Ending the Image Quality Adjustment
Press the PICTURE ADJUST button.
REFERENCE:
• In the Graph of Gamma Correction, the horizontal axis indicates the brightness level of the image that is
recorded on the disc, and the vertical axis indicates the brightness level of the image when it is output
from this unit.
MEMORY 1
0
0
100
235
GO : 0 24
MEMORY 1
0
0
100
235
GO : 0 24
• When bright points of the disc side are adjusted
to the “dark” of the output side, the fine parts
of the bright portion that normally become hard
to see, become an easily discerned image.
• When dark points of the disc side are adjusted
to the “bright” of the output side, the fine parts
of the dark portion that normally become hard
to see, become an easily discerned image.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DVD2910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DVD2910 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DVD2910

Denon DVD2910 User Manual - English - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info