136674
28
Zoom out
Zoom in
Previous page
1/124
Next page
28
ENGLISH
3
4
5
When Image Quality Adjustment 1 Is Selected
and Adjusted:
Press cursor button (ª), then select the image
quality adjustment item with cursor buttons
(
0, 1), set the adjustment value with cursor
buttons (, ª), and press the ENTER button.
All of the adjusted contents will be stored.
CONTRAST (6 to +6) (Factory default: 0)
This adjusts the light/dark difference of the
image.
BRIGHTNESS (0 to +12) (Factory default: 0)
This adjusts the brightness of the image.
SHARPNESS (MID) (6 to +6) (Factory default: 0)
This adjusts the sharpness of the image for
the intermediate frequencies.
SHARPNESS (HIGH) (6 to +6) (Factory default:
0)
This adjusts the sharpness of the image for
the high frequencies. (Only effective for
progressive images.)
HUE (6 to +6) (Factory default: 0)
This adjusts the balance between green and
red. (Not effective for progressive scan output
nor component output.)
ENHANCER (0 to +7) (Factory default: 0)
This emphasizes the contour of the image.
MEMORY 1
123
00000
MH
0
Remote control unit
ENTER
Remote control unit
When Image Quality Adjustment 2 Is Selected
and Adjusted:
BLACK LEVEL (5 to +5) (Factory default: 0)
This adjusts the black level.
WHITE LEVEL (5 to +5) (Factory default: 0)
This adjusts the white level.
CHROMA LEVEL (6 to +6) (Factory default: 0)
This adjusts the density of the color.
CHROMA DELAY (2 to +2) (Factory default:
0)
This adjusts the shift of the brightness signal
and the color signal of the image. (Only
effective for progressive images.)
(Adjustment between 1 and +1 is possible for
interlaced video.)
When Noise Reduction (Adjustment 3) Is
Selected and Adjusted:
3DNR (0 to +7) (Factory default: 0)
This reduces the noise of the overall image.
BLNR (0 to +8) (Factory default: 0)
This reduces the block noise of the image.
MQNR (0 to +8) (Factory default: 0)
This reduces the mosquito noise of the image.
CCS (0 to +3) (Factory default: 0)
This performs removal of the color signal
component for images in which the color
signal component is mixed with the brightness
signal. (Only effective with progressive
images.)
MEMORY 1
123
0-2-6-6
Remote control unit
ENTER
Remote control unit
MEMORY 1
123
-6 -6 -6 -6
Remote control unit
ENTER
Remote control unit
When Gamma Correction by Numerical Input
Has Been Selected and Adjusted: (Press the
cursor button (ª))
All of the adjusted contents are stored.
The brightness level can be adjusted in a range
of 16 to 235.
Pressing the cursor button () raises the level
(and the image becomes brighter), and
pressing the cursor button (ª) lowers the level
(and the image becomes darker).
A press of the CLEAR button returns all of the
setting points to the standard level.
The level of the selected point cannot exceed
the level of the points above and below that
point. (A dark portion cannot be set to exceed a
portion that is brighter than it.)
Ending the Image Quality Adjustment
Press the PIC.ADJ button again.
When Gamma Correction by Gamma Correction
Graph Input Has Been Selected and Adjusted.
MEMORY 1
123
24 32 48 80 96 128 160 19264
G0 G1 G2 G4 G5 G6 G7 G8
224
G9G3
Remote control unit
ENTER
Remote control unit
6
When Gamma Correction by Numerical Input
Has Been Selected and Adjusted: (Press the
enter button)
All of the adjusted contents are stored.
The brightness level can be adjusted in a range
of 16 to 235.
Pressing the cursor button () raises the level
(and the image becomes brighter), and
pressing the cursor button (ª) lowers the level
(and the image becomes darker).
A press of the CLEAR button returns all of the
setting points to the standard level.
The level of the selected point cannot exceed
the level of the points above and below that
point. (A dark portion cannot be set to exceed a
portion that is brighter than it.)
Ending the Image Quality Adjustment
Press the PIC.ADJ button again.
When Gamma Correction by Gamma Correction
Graph Input Has Been Selected and Adjusted.
MEMORY 1
0
0
100
235
GO : 0 24
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon dvd a11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon dvd a11 in the language / languages: German, French, Italian as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon dvd a11

Denon dvd a11 User Manual - English - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info