68570
15
Zoom out
Zoom in
Previous page
1/46
Next page
11
Connections
ENGLISH
Connections
ENGLISH
Press <HDMI RESOLUTION> to select the HDMI output mode. HDMI video resolution changes as
follows.
*
1
“480p” will be displayed only when an NTSC disc or a1080p/24 frame material is being played back.
HDMI Output Mode and Actual Output Signals
Front Panel Display HDMI Video Resolution
480 Progressive
576 Progressive
Press <HDMI RESOLUTION>
720 Progressive
Press <HDMI RESOLUTION>
1080 Interlaced
Press <HDMI RESOLUTION>
1080 Progressive
Press <HDMI RESOLUTION>
1080 Progressive 24 frame
Press <HDMI RESOLUTION>
*
1
Note
You can change the HDMI output mode with <HDMI RESOLUTION> during playback as well.
After you select a HDMI output mode, the supported HDMI video resolution will be output. If the
connected display device does not support the selected HDMI video resolution, the unit will
output the next available resolution.
Video and audio signals may be distorted temporarily when switching to/from the HDMI output
mode.
You can also change the HDMI output mode from “HDMI Video Resolution” in the “Video” menu
on the setup menu. Refer to page 32.
In order to get natural and high quality film reproduction of 24-frame film material, select
“1080p24”. (The connected device must also be compatible with the 1080p24 frame input.)
It is recommended to use High Speed HDMI cable (also known as HDMI category 2 cable) for
better compatibility.
For BD, with the 1080p24 frame, you can enjoy natural and high quality film production of 24-
frame film material. If the connected display device is not compatible for 1080p24 frame, you
cannot set “HDMI Video Resolution” to “1080p24”.
If the disc contains 1080p24 frame material, 60-frame or 50-frame image will be output unless
“1080p24” is selected.
Even when “HDMI Video Resolution” is set to “1080p24”, if “I/P Direct” is set to “Off” or for playing
back DVD, a video resolution supported by the disc and the display device will be output instead
of 1080p24 frame.
There is no output from VIDEO OUT, S VIDEO OUT and COMPONENT VIDEO OUT jacks when you
play back a BD that recorded 24-frame film material.
COMPONENT VIDEO OUT jacks may not output any signals when you set “HDMI Select” to “RGB”
or “HDMI Deep Color” to “Auto” during BD playback.
When both HDMI OUT and COMPONENT VIDEO OUT jacks are connected to display device, and
HDMI output is “1080p”, the video signal may not be output properly from the COMPONENT
VIDEO OUT jacks.
If you change the HDMI output mode with <HDMI RESOLUTION> during BD playback, it may
take 2 to 10 seconds to change, and while changing the HDMI output mode, sound and video will
be stopped.
“HDMI Deep Color” is available only when the display device is connected by HDMI cable and
supports HDMI Deep Colour.
For “Auto” in “HDMI Deep Color” and for “1080p” or “1080p24” in “HDMI Video Resolution”, using
the High Speed HDMI cable is recommended.
E5J00_02_04ED_V2_EN.book Page 11 Thursday, October 16, 2008 12:00 PM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DVD-3800BD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DVD-3800BD in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info