138811
37
Zoom out
Zoom in
Previous page
1/46
Next page
33
Function Setup Function Setup
ENGLISH
ENGLISH
Settings with (*) are the default.
Quick menu consists of the setting menus frequently used, and they are accompanied with
mark.
For “HDMI RGB Setting”, select “Enhanced” if the black-white contrast is not clear. The setting is
effective only for HDMI RGB output.
Even if “HDMI Video Resolution” is set to “1080p24” and “I/P Direct” is set to “On”, for the BD that
is not recorded by 1080p24 frame or for DVD, a video resolution supported by the disc and the
display device will be output instead of 1080p24 frame.
An individual picture on the screen is called as “Frame” , which consists of two separate images
called as “Field”. Some pictures may be blurred at the auto setting in “Still Mode” due to their
data characteristics.
If the picture is not output properly to the display device because of the “HDMI Video
Resolution” or “Component Output” setting, press and hold B on the front panel for more than
5 seconds. Both settings will be reset to the default automatically.
When “Component Output” is set to “480i/576i”, “4:3 Squeeze Auto” and “4:3 Squeeze On” in “TV
Aspect” do not function.
If HDMI is connected, for video resolution for the component output, you can only select video
resolution that currently output from HDMI OUT or 480i/576i.
For 50 frame BD materials, only resolution lower than 720p is available for the “Component
Output”.
If the video resolution for the component output and HDMI video resolution does not match, the
video resolution for the component output will be switched to current HDMI output resolution.
COMPONENT VIDEO OUT jacks may not output any signals depend on the disc material.
If you play back copy-protected DVD video, 480p/576p signal will be output from the
COMPONENT VIDEO OUT jacks, when “Component Output” is set to “720p” or “1080i”.
If connected display device does not support 1080p24 frame or “I/P Direct” is set to “Off”,
“1080p24” in “HDMI Video Resolution” will be displayed in grey and you can not select the item.
If you set to “1080p24” for the “HDMI Video Resolution”, and the contents of the disc is not
compatible for 1080p24 frame, 1080p60 frame will be output if it is an NTSC disc, and 1080p50
frame will be output if it is a PAL disc.
For playing back BD, if you set “Component Output” to “480i/576i”, 480p/576p signal will be
output from the COMPONENT VIDEO OUT jacks.
The setting items which are not available with current situation of this unit will be displayed in
grey and you cannot select the items.
Even if “HDMI Select” is set to “YCbCr”, if the display device does not support YCbCr, RGB will be
output.
If “HDMI Video Resolution” is set to “1080p” or “1080p24”, you cannot set “Component Output”.
Audio
For how to select the setting items and options, refer to “Custom” on page 30.
The default setting of the “BD Audio Mode” is “Mix Audio Output”. If you want to output only the
high quality primary audio, set “BD Audio Mode” to “HD Audio Output”.
Setting items Options
Wall Paper
Sets the picture to be displayed on
the screen for stop mode or audio
playback mode.
Picture*
Blue
Black
Gray
Setting items Options
BD Audio Mode
For BD, select whether to output
the secondary and interactive
audio with primary audio if it is
available or only the primary
audio. Refer to “Setting the BD
Audio Mode” on page 24.
Mix Audio Output*:
Output the secondary and interactive audio with
primary audio if it is available.
HD Audio Output:
Output only the primary audio. Set this mode in order to
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS or DTS-HD sound of BD through HDMI connection.
HDMI Audio Out
Sets the audio format for the audio
output from the HDMI OUT.
HDMI Multi(Normal)*:
The multi-channel audio signals are output from the
HDMI OUT with a bitstream or LPCM.
HDMI Multi(LPCM):
The multi-channel audio signals are output from the
HDMI OUT with a LPCM.
Refer to pages 35-36 for setting options.
HDMI 2ch:
The audio signals are output from the HDMI OUT with a
downmixed to 2ch LPCM.
Audio Mute:
Mutes the HDMI audio signal, and set the signal format
of the DIGITAL OUT.
Refer to the “Digital Out Setting” on page 34 for setting
options.
Audio
BD Audio Mode
HDMI Audio Out
7.1ch Audio Out
Down Sampling
DRC
Source Direct
Bass Enhancer
Mix Audio Output
HDMI Multi(Normal)
Multi Channel
Off
Auto
Off
Off
Audio
Audio Adjust
Virtual Surround
0ms
Off
E5J00_02_04ED_V2_EN.book Page 33 Thursday, October 16, 2008 12:00 PM
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon dvd 3800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon dvd 3800 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon dvd 3800

Denon dvd 3800 User Manual - German - 109 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info